开云体育

You can get a? keyboard on the touch screen to be used for setting up wifi. https://pimylifeup.com/raspberry-pi-on-screen-keyboard/ /niels, oz9ny

I don't do a lot of HF operation from home because my urban neighborhood has a very high noise floor. So the first real workout for my sBitx came today in the NJQRP Skeeter Hunt. My operation was

That's great, many thanks!? I'll try as soon as I get home tonight.

I believe that this one from K3RTA has the screens that you want.? Included is the basic and enhanced versions.? You need the LTS editor to compile without the out-of-memory error. 73 Evan AC9TU

H All, I've just installed a second Arduino to get the improved s-meter and spectrum displays. I'm running CEC 1.2 and all's working well except that I can't find a Nextion HMI/TFT for the 3.5 E that

Hi Mark, Thanks for the description. Dr. Lee is a very clever and talented programmer. However, I find his code fairly cryptic and, like you, I have to puzzle over why he did some of the things he

Hi All, Once again, I have to praise Ashhar for his design.? Once the LM338 is replaced with a buck regulator, the radio works great.? I've run WSJT in wspr mode on and off for a few days and I have

There will never be another rig like KM4UDX FrankenBiTx.? ?Don, it is truly a unique site. And I can honestly say that no one has seen a radio like this before.? You neglected to mention the cell

Thanks! I have two radios set up in Pelican cases. I prototyped them using thin plywood for the panel till I get it finalized for aluminum. I did a TS 480 and had to build a recessed box for the

OK, to answer my own question.... The code that runs in the second Nano actually *reads* using *Hardware serial* and *writes* using the slimmed down *Software Serial* in the file uart_forward.cpp. The

I forgot to mention the Raduino32 effort that is ongoing.? That might be another source for more capability in the software. /g/BITX20/message/95106 73 Evan AC9TU

Aaron, The best place to look for instruction is on the Hamskey.com site.? This is the original location where Dr. Lee published his work.? It is a Blog type of site, so it is constantly growing.?

High John, My preference is the 3.5" display.? I can power it without having to add another power source.? I have installed my v5 in an AmateurRadioKits.in enclosure.? It turned out to look like a

What do you think is a reasonably useful size display without going really big? Big enough to not need a stylus. Any surplus deals on heatsinks? I am thinking about running the final on the ubitx v3

Thanks, Evan I will be looking into that. Is there an operating manual for the uBITX - Nextion? I have been going through the different menus and between that and uBITX Memory Manager, I will be busy

Aaron, Because the kit can be ordered, I would interpret that he is not building more, and when the stock is gone, it will no longer be offered. Any S meter can be fed to the A7 line displayed on the

Thanks again Evan. The Kit-Projects website says that they are no longer making kits for the AGC and referred to the file section of this group for the schematic and parts list. Does any of the mods

Hi Aaron, It does look good.? I have used a lapel printer to label the jacks on a couple of uBitx I worked on.? It is about the same result as your labels because the label strip has to be trimmed

Gotta love repurposing a vacuum-cleaner switch for a QRP radio!? Nice build, actually, in a Frankenstein sor of way. Fugly? and functional! Peace, K3RTA