开云体育

Yup that was set okay. Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 Sent: Wednesday, July 29, 2020 9:58 AM To: [email protected]<mailto:[email protected]> Subject: Re:

Cable checks okay for continuity. Got verbose error msg. Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P" Sketch uses 22966 bytes (74%) of program storage space. Maximum is 30720 bytes.

Ted, Do as Allard suggested before purchasing anything. 73 Evan AC9TU

Ted, Can you verify that you have a Nano clone?? It could be that you have a Raduino that is not from HF Signals.? HF Signals uses Nano clones with the CH340 series of USB interfaces.? The

Ted, also make sure to select "AVRISP mkll" under Tools => Programmer 73 Allard PE1NWL

Evan Okay Comport set as you suggested. For some reason “Com&LPT” did not appear on Device Manager until I plugged in My Navigator and then the Nano. Something I set when setting the Navigator up,

Evan Yes using Windows 10. Looks like I messed up the Comport setup but got the rest okay. Now getting a sync error when uploading so will go back and redo the Comport as you suggest. Will let you

Ted, pick your flavor. https://amateurradiokits.in/store/printed-circuit-boards/ 72,73 de KC8CKZ

Is the bitx40 still available, or long gone?? I have a project in mind for one if theres a spare board or kit floating around. -ted

Expecting antenna parts today have to try Chuck Western Pennsylvania 73's -- LRB Chuck

Ditto here on antenna. Mainly picking up South America here. (Amazing since it's on my WSPR dipole @ 5'). Need to sneak it up. Victor, South Florida 72,73

I’ll have to try if my antenna is ok. AZ here!

Ted, I assume that you are using Windows as your OS.? If so, then I would suggest that you open the Device Manager through right-clicking on the Windows icon and selecting Device Manager. Open the

The cable is for a digital camera, mp3 player, to a computer so believe it is for data. I have more setup to do. Thanks Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

If it is a "Charging Cable" it may not have the data leads. If it is a data cable it will work for both data and charging. You do have to select the correct Arduino model and the correct boot loader

Vic and/or Dave Trying to update BITX40 with early Nano version. I found a cable at the Dollar Store that fits the Nano. It’s not blue and is fairly long. 6ft. Sketch compiles okay but upload fails

Reed, I did not hear anything.? As with you, the noise level here is extremely high.? Can only hear a few high power stations every so often. Thanks for trying.? Maybe we will have better luck

Evan - Called for you just now on 7.277 (from WA). Nothing heard, so presumably no good path at the moment, or perhaps I just have too much noise here. Reed

Monitored again, and no one else on "Live" 73 Evan AC9TU

Suggestion:? Add the frequency being monitored to the Live symbol.? Something like this: