开云体育

If you just want to try it out, bypass the bandpass filter and change the vfo to get the frequency coverage desired. take a look at this. http://golddredgervideo.com/kc0wox/bitxsmd/smdbitx.htm The web

Still "tuned in " Chris. One step at a time :-)

Anytime I try to put a condenser element into any other microphone, I'll find some soft foam padding in a sheet or in a block that I can cut into a neat piece to fill the inside the subject microphone

It's the Version 3b with vfo.? I've got most of the parts for the Digital VFO unit for it as well, but missed some (I purchased the kit unfinished at a hamfest and put it together - discovered parts

Robert sorry to see that negative post except I kind of saw it coming. Anyway the architecture of the BITX20 and the uBITX are very similar so replacing the filter elements for 20 meters with the 10

Glad that we could help. Do not feel alone, all of us have done this sort of thing.? That is where having another person review helps catch the simple mistakes that so often get us. For me, hunting

Farhan sometimes offers suggestions. He's a great guy and proud of his products. [email protected]> wrote:

Hi Evan When you asked about the code, I did have KD8CEC code on it. I put it on because the stock code was not working. So I went to install the stock code and saw at the bottom that there was a pdf

Ther is a factory reset feature on the KD8CEC (referred to as CEC) firmware.? I do not know if there is one on the firmware from HFSignals.? I very quickly replaced the stock firmware with the

Coverting bitx3b for example, should not be difficult. They use lc bfo and crystal bfo. Whrete they used dds vfo, it is easier. Now let us comebto the front end bpf. Itvhas to be re-designed for the

As K7UL mentioned, you'll want to actually open the .ino project. It looks like you opened the IDE, but didn't load the actual code. For the "processor" in the menu, try selecting "ATmega328P (Old

Ouch! Sounds like some of the smart people also have thin skins. Please don't insult them by asking THEM to learn anything more than they already know. It seems some of them demand to be spoon-fed

If you have the right firmware I think you can reset to factory defaults first. I’ll let Evan call it because he is more familiar. Joe KD2NFC

Idk. I might have an older copy allaying around Joe KD2NFC

I did more searching today.? It seems that people have done this conversion, but again, NO DATA AVAILABLE (such as the proper cans for filtering and so on).? My main radio is unreliable transmitting

Doug, 11.05550 as Raj stated is the correct frequency for a v5 board.? Before you go adjusting things, can you verify that the stock v5 code is in the Raduino nano?? Have you or anyone else uploaded

Hi Evan I checked.... It is a V.5.. Printed on the pcb.. It has an IM 386 ic and the crystals are 11.059... So, when I go to BFO frequency, the frequency should be 11.0555 mhz? I have a lot of turning

The original is 6.1.? You can get it from Ashhar Farhan's GitHub account: https://github.com/afarhan/ubitxv6 There is also a How-To video from Ashhar

Hi Ralph, You do want to select the processor setting as ATmega328P Old bootloader. Also, you will want to the Arduino programming IDE to load the source code.? After you move the code to the

Should be 11.055,5 It's close enough.