开云体育

Good Eye Laurence Those heat sinks are going to go, too small. The board bought used had them on. He did a beautiful job overall. He isolated the heat sinks You can see the plastic collet at the

Forgot to add pictures

Moderator, feel free to delete if this is not allowed. I have 3 ?Bitx radios and to my current thinking, that is one too many. I would like to offer 2 of them to anyone interested. Both have had

Looks great, however, I can't see if your PA heatsinks are touching the chassis. If so I am sure you know that they need to be insulated. Awesome Laurence KB1HKO

Great idea and looks good to boot! Jack, W8TEE

I have noticed particularly on my ubitx radios that the raduino board is just hanging on the 16 pin connector. Very bad engineering to not have a mechanical mount. The other day while putting

Got it, Yep, ttl<->cmos level conversion always very important with Serial comms. Thanks for explaining that the software will look for the serial connectivity. Regards Laurence

Hi Laurence, first, it is very important to have a level converter (e.g. DeLock Converter USB 2.0 male > Serial TTL) because the ?Cs serial Port on the Raduino-Board will be toasted if you connect

You could play with different values of C217 to C221 inclusive. Try 56pf or even 47pf you should get better tone with IF at 11.0555 Raj

Hi folks, like others my v5 has got a very poor carrier suppression. To fix this, I followed the solution from former topics to vary the? BFO-Frequency. I think 11055500 is a good compromise for

David, thank you for your hard work? for the ubitx community; I ordered an AGC kit and some new knobs. Definitely will be picking up a mic case and paddles soon. Looking forward to the installation

More mics and paddles posted! -- David ?N8DAH Kit-Projects.com ( http://www.kit-projects.com ) Shop is open! ( Https://Shop.Kit-Projects.com )

Hi Sunil, I am interested in one of the Blue and White 3.2 cases when they become available. Joel N6ALT

...would be cool to have just the Nextion front panels available, so those of us that already own cases can upgrade.. :) also: i think the 'sold out' status can be misleading, in that new items

Forgot to show a cool screenshot Joe KD2NFC

Well I used the 7” file and selected my screen size and compiled. It looks like it’s all in place not like going from a 3.2” file and loading on a bigger screen. Lol. Anyway I’m about to

Hi Joe, Is there a 5" version available? I just received my 5" Nextion HMI finally. I am trying a 5" tft file I found now but I am not sure if its the same as yours here.

Bill, Zero 'beat' is a bit of a misnomer as it's really a matter of listening for nothing rather than listening for something. To understand, let's review the similarities between hearing SSB and

Glad to hear that you found the problem.? I would also suggest the KD8CEC Memory Manager program.? That allows you to easily change any of the parameters including the memory presets and calibration

Thank you the hex file was the culprit I installed UBITXV5_CEC_V1.200_NX.HEX and it works like a charm.