开云体育

Curt wrote Harmonics could be fixed by an external daughter board with relays and transmit low pass filters, duplicating what KT1,KT2,KT3 and L11 through L22 are supposed to be doing. Some forum

Good idea, do you have a link handy? Roy WA0YMH

Thanks farhan jee after all another two days, the batteries would get charged and you can do the telemetry etc. hopefully we can get access from end of week . regards sarma vu3zmv

Lee I see you got your key answers.? I do suggest building and tested with the raduino, then mod this rig to your heart's content.? Much easier to confirm proper wiring with less hardware in the

the exseedsat now appears trackable on amsat org. this bire has run into a bit of rough weather. due to the extra-ordinarily delayed launch, the batteries of our satellite are probably in a discharged

Thanks everyone for the assistance, I will try to put in practice the advices you all gave me. First of all I would like to try Dr. Ian's firmware, I just give it a try to see if the problem persists.

Just to clear it up, I don't read or even interact with HF Signals on a daily basis. I am only a sort of advisor to them. It is run autonomously by the collective with Ehan overseeing them. Very few

Thanks Jack, looking forward to the boards release! _____ From: [email protected] [mailto:[email protected]] On Behalf Of Jack Purdum via Groups.Io Sent: Tuesday, December 04, 2018 9:38 AM To:

The BOM that we are distributing is for the add-on parts the buyer must supply for the JackAl board. This BOM is attached. Essentially, the JackAl board looks like this when it's finished: The SMD

Jack, Just wondering if your closer to publishing the BOM for the JackAl. Thought I saw in one of your messages that you would publish it last week but have not seen it yet. Rick, KN4AIE _____ From:

We did not think to ask HF Signals if they wanted to distribute the JackAl board, so it's going to be sold by QRP Guys. JackAl does replace the Raduino board, but as Mike mentions, there seems to be a

Have you tried using a button as a CW keyer? It works?

Mike , no need to apo... let us serve Lee to what best we can.. regards sarma vu3zmv

Good point MVS Sarma.? I didn't read Lee's post very carefully.? My apologies! And I agree with Sarma ... however, Raduino seem to be easily resold on this list, since they are easily messed up with

That is why the OP was asking whether farhan sells ubitx w/o raduino as LEE proposes to use jackaLL board. ON HF signals I did never find a rate with out. It is always with raduino only regards sarma

Lee The JackAl add-on is not an HF Signals product.? You will need to ask the JackAl developers (Jack W8TEE), but as I understand it, the raduino is replaced by the Jackal board. Mim -- Mike Woods

He posts here regularly.? He's also posted in the various threads about relay replacement (he reported that current production boards have relays that bring harmonics into compliance) and various

Looking to sell this dsp as I have to many filters right now. Laserbeam ( https://forums.qrz.com/index.php?threads/sotabeams-laserbeam-dsp-variable-filter.637389/ ) -- David ?N8DAH Kit-Projects.com (

He has been pretty busy launching the satellite that went up today on the Falcon 9

Does Ashhar Farhan answer emails sent to his HFSignals email account? ? I asked if there are any mods that need to be done to the current version you are shipping and if the JackAl add-on no longer