开云体育

Yes I guess my reply e-mail never made it. They are all shipping out tomorrow, save the UK gentleman. I have 1 kit left and 10 more on order. -- David ?N8DAH Kit-Projects.com (

On my ?BITX (V3), with 13.8VDC in there's 13.2VDC on the unloaded mic connection. Andy, KG5RKP

Dave Do you have my payment Art Olson Sent: Tuesday, November 27, 2018 6:43 PM To: [email protected] Subject: Re: [BITX20] CW Zero Beat 1 left Dave I got yours set aside and will check with the post in

1? left Dave I got yours set aside and will check with the post in the morning on shipping to the UK -- David ?N8DAH Kit-Projects.com ( http://www.kit-projects.com )

AndyH, Don't know if the clock signals are interfering with reception, but some noise is interfering with my scope measurements of the low level RX signal path.? With no antenna and high audio, can

Dale, be sure your mic input has the 8vDC on the positive audio lead. QST has another schematic for mic inputs with a separate, third pin carrying the 8v, which is to connect this pin to the collector

If you've got so much clock signal floating around that you have trouble receiving, you might want to find the problem.? My radio is dead quiet with no antenna attached, as is my BITX40.? I can

Just reduces the gain. See the data sheet for the part. They explain it there. Sent: Tuesday, November 27, 2018 1:54 PM To: [email protected] Subject: [BITX20] Preamp question Now that Raduino working,

Now that Raduino working, still trying to resolve RX issues. There is so much clock signal floating around that it masks the RX signal when I try to trace with scope. So... Now trying a brute force

HI David, An ideal add on for my u bitx,put me down for a completed zero beat board please and let me know the total cost posted to the uk.Regards Dave G0AYD QRZ.COM.

I have 3-4 left (waiting on some payments) -- David ?N8DAH Kit-Projects.com ( http://www.kit-projects.com )

I would expect different machines to use different COM ports. If I compile for a Nano, it's COM4. For a Teensy, its COM6. I would not be surprised by different COM ports. You can use the Control Panel

I'm pretty sure that COM3 is correct as?that's the value?I used when I reloaded the firmware. K5KDT Kevin

Thanks. Prusa i3 Mk3. Highly recommended. Google Prusa Printers. They are a Czech firm. I built it from a kit. It took a day or so but instructions very clear. You can buy assembled too. Good luck!

It looks fantastic.?? What kind of 3D Printer do you use?? It looks very smooth.?? I'm thinking of doing something for a 7" JackAl add-on. -- Lee - N9LO?"I Void Warranties"

TSW (The Triumvirate Skonk Worx) is announcing discount pricing on the BITeensio and Raduino Clone bare boards and kits for this holiday season.? Prices are valid from now through December 31, 2018.

Thanks guys, I'll try again (and with a different mini USB cable also). Pretty sure it's not the cable as I was able to reload the stock firmware. Will spend some time with the memory manager of other

Thanks. I'm going to build it into my ubitx so I can use my kenwood mics with it. -- N5KBP

When I tried loading the 1.1 (1.097) version of firmware I had random characters appear on the screen I was told that I picked the wrong display but moved back to the v1.08 It?also works with the

OK by me Evan AC9TU