¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Expanded Topics Messages Polls
Date
Re: CAT control #arduino #ubitx

Jack Purdum
 

I would expect different machines to use different COM ports. If I compile for a Nano, it's COM4. For a Teensy, its COM6. I would not be surprised by different COM ports. You can use the Control Panel - Device Manager to see how the ports are allocated.

Jack, W8TEE

On Tuesday, November 27, 2018, 10:53:46 AM EST, Kevin Timm <kevindtimm@...> wrote:


I'm pretty sure that COM3 is correct as?that's the value?I used when I reloaded the firmware.

K5KDT
Kevin

Re: CAT control #arduino #ubitx

 

I'm pretty sure that COM3 is correct as?that's the value?I used when I reloaded the firmware.

K5KDT
Kevin
Re: uBitx Go Box 3d print

 

¿ªÔÆÌåÓý

Thanks. Prusa i3 Mk3. Highly recommended. Google Prusa Printers. They are a Czech firm. I built it from a kit. It took a day or so but instructions very clear. You can buy assembled too. Good luck!



On 27 Nov 2018, at 15:12, Lee <mr.olson@...> wrote:

It looks fantastic.?? What kind of 3D Printer do you use?? It looks very smooth.?? I'm thinking of doing something for a 7" JackAl add-on.
--
Lee - N9LO? "I Void Warranties"

?
Re: uBitx Go Box 3d print

 

It looks fantastic.?? What kind of 3D Printer do you use?? It looks very smooth.?? I'm thinking of doing something for a 7" JackAl add-on.
--
Lee - N9LO? "I Void Warranties"

?
Holiday pricing on TSW's BITeensio and Raduino Clone boards & Kits #ubitx #bitx40

 

TSW (The Triumvirate Skonk Worx) is announcing discount pricing on the BITeensio and Raduino Clone bare boards and kits for this holiday season.? Prices are valid from now through December 31, 2018.

See the TSW Website, and look for the green highlighted prices.? To take advantage of these prices, please use the email link for W0EB on the TSW page to request ordering instructions.

Thanks for your interest,
Jim - W0EB
TSW Project Coordinator
Re: CAT control #arduino #ubitx

 

Thanks guys, I'll try again (and with a different mini USB cable also).? Pretty sure it's not the cable as I was able to reload the stock firmware.? Will spend some time with the memory manager of other add ons.

K5KDT
Kevin

On Tue, Nov 27, 2018 at 8:25 AM <davesters@...> wrote:
When I tried loading the 1.1 (1.097) version of firmware I had random characters appear on the screen I was told that I picked the wrong display but moved back to the v1.08 It?also works with the ubitx 4.3 on my v3 ubitx. The ubitx 4.3 is trickier to get into a single ino file.

I doubt if usb port 3 is the acutal port where your ubitx is located. If you disconnect the cable does the port go away.

I have a win 10 computer that sometimes I have to turn off and back on to recognize stale port.?

Re: Great Results with Mic Preamp

N5KBP
 

Thanks. I'm going to build it into my ubitx so I can use my kenwood mics with it.

--
N5KBP
Re: CAT control #arduino #ubitx

 

When I tried loading the 1.1 (1.097) version of firmware I had random characters appear on the screen I was told that I picked the wrong display but moved back to the v1.08 It?also works with the ubitx 4.3 on my v3 ubitx. The ubitx 4.3 is trickier to get into a single ino file.

I doubt if usb port 3 is the acutal port where your ubitx is located. If you disconnect the cable does the port go away.

I have a win 10 computer that sometimes I have to turn off and back on to recognize stale port.?
Re: 7.277mHz Sunday Afternoon

 

OK by me

Evan
AC9TU
Re: 7.277mHz Sunday Afternoon

 

Perhaps you have to go with majority of users, unless your band on7.277 is blocked for ham in your nation.



On Tue, Nov 27, 2018 at 5:57 PM Jay - WS4JM <ws4jm@...> wrote:
I'd be OK with using 7.177 instead 7.277. Anyone else?

Re: 7.277mHz Sunday Afternoon

 

I'd be OK with using 7.177 instead 7.277. Anyone else?
Re: Great Results with Mic Preamp

Dale Brooks KG7SSB
 

Thanks Paul for the schematic of the dynamic mic amplifier stage. I'll give this a test run and see how she does. Dale


On Mon, Nov 26, 2018 at 10:26 PM Paul Dobosz <pjdobosz@...> wrote:


Here is the schematic ... Assumes phantom power (~8V DC) is on the Mic Audio line.? Can be sky wired and shrink wrapped into a small assembly with fly leads that will fit inside of many dynamic mic bodies.
Re: Great Results with Mic Preamp

Paul Dobosz
 



Here is the schematic ... Assumes phantom power (~8V DC) is on the Mic Audio line.? Can be sky wired and shrink wrapped into a small assembly with fly leads that will fit inside of many dynamic mic bodies.
Baofeng Speaker MIC on Bitx 40

 

Need Information (help) wiring a Baofeng speaker? MIC to my Bitx 40. Don't really want to use the MIC speaker, will probably just use the 2.5 mm socket un-wired for the speaker plug. So asking about the wiring to the MIC.
Thanks in advance.
Scot?
Re: Great Results with Mic Preamp

Mike Lichtman
 

Jer,
I found a small 1uf electrolytic cap in my parts drawer. 73 Mike KF6KXG
Re: Great Results with Mic Preamp

Dale Brooks KG7SSB
 

Hi Guys, it may have already been posted but I would like to take a look at the mic amplifier circuit. I'm also interested in building a low noise audio pre-amp. Dale kg7ssb


On Mon, Nov 26, 2018 at 4:37 PM N5KBP via Groups.Io <martyduplissey=[email protected]> wrote:
On Mon, Nov 26, 2018 at 02:32 PM, Paul Dobosz wrote:
K8PD
Paul care to share the schematic for those of us who don't have access to the article.
?
--
N5KBP

Re: Great Results with Mic Preamp

N5KBP
 

On Mon, Nov 26, 2018 at 02:32 PM, Paul Dobosz wrote:
K8PD
Paul care to share the schematic for those of us who don't have access to the article.
?
--
N5KBP
Re: Software

N5KBP
 

Rich Neese has built new screens for 2.5 to 7 inch



--
N5KBP
Re: uBitx Go Box 3d print

 

¿ªÔÆÌåÓý

Hi Dan,

I can¡¯t give you a link I am afraid. I brought it from the electrical retailer, Maplin, in their bankruptcy sale early this summer.

If you can get hold of a similar size case, it is quite a simple matter to add to the depth of the top and sides in CAD software. Just be careful not to increase the size by using drag handles of the object as everything else then becomes too big!

Good luck and be sure to post some pics of your own version!

73s

Daimon. G4USI.


On 26 Nov 2018, at 18:32, twowindsbear via Groups.Io <twowindsbear@...> wrote:

On Mon, Nov 26, 2018 at 03:33 AM, Daimon Tilley wrote:
flight case

Looks really sharp. Thanks for posting.? Can you provide a source for the?flight case that you used?? Thanks & 73 Dan
Re: CAT control #arduino #ubitx

 

I had it running on 1.097 and it was working with my old laptop just fine, recently loaded V1.1 and also no problem.?
As the loads are the same and only differs in naming you should be fine.

John

On Mon, Nov 26, 2018 at 4:33 PM John Zonneveld <jjczon@...> wrote:
Also with the 817 it works
Capture_wsjtx-817.PNG

On Mon, Nov 26, 2018 at 4:30 PM John <jjczon@...> wrote:

I recently obtained a new? W10 laptop and didn't install any drivers, maybe they were installed when I installed Arduino IDE. Have no problem whatsoever to connect to my uBitX v3.

Attached device manager and wsjt-x

?

John, K5GT
55501 - 55520 of 116995