开云体育

Thanks Mike, I will order one this week, too bad there are no more local shops where I can pick one up today. Joe KD2NFC

If we went to a screen that small, I think we'd drop the touch screen feature and do complete menu system. The costs aren't cheap compared to those display sizes (e.g., > $10 versus $34), but 5" at

Hello Jack, I’m very interested, Please add me also to buyer’s list with a 7” LCD option. Paypal Invoice to f1apy(at)orange.fr (please replace (at) by @) Very good stuff 73’s de Jacques –

You're added to the list! Jack, W8TEE

Ok, calling it building seems a bit exaggerated as it is all assembled already. I found the stock mic element slightly better than the others I had. There are other more sensitive mic elements on the

As for the power meter I agree it is important to have one. My first one was the kit RFprobe by Hendricks. You can probably make one 'plagiarizing' its schematic. Inexpensive, simple and it works

Hi everyone! I'm not sure I totally understand what are the spurs and harmonics, I have a faint idea, anyway. What I read on the net is that are no known issues about spurs and harmonics in the 40m

Hey! I like the way you put the uBitx in the case. Well done! I have a uBitx V4.3 which I tested few days ago. Can you tell me please what's the impedance and the power of the speaker you use? Because

I have a BITX40 radio and a uBitx radio for sale, including two new Excellway EF01 cases, two each of the Kees AGC kits and the Kees "Click fix" kits (both as-received, unassembled), an adapted

Im sure you could but there is a lot of stuff on that display. At some point it gets too small and almost unusable. Testing it now. MRM

You need to get a power meter to know what’s going on. There are plenty of low cost suggestions that have been posted here. -- Mike AI4NS

Glenn, What is the actual rf power being delivered by the 2 ea 2n2222a transistors in the predriver section? Are you able to measure that? I wonder if 2 ea 2n5770s would be a better transistor in that

Hi Jack and Al, Wow awesome project. Please add me to the buyer's full kit list with a 7" LCD option. PayPal Invoice to mansueto.grech@... Keep up the good work. 73's Mans. 9H1GB

Hi Tom ? ? ? ? ? ?Very tnx for the answer but ofr the 1st solution the lcd must worked a long time or has been schoked or mine is only 1 month in my hand. The 2nd solution was tried in case but

Looking at another QRR radio, they use separate relays for RX/TX signal and PWR(TX/RX). Then during TX, they mute the RX section with a transistor to GND on the input side of the RX chain(relay at

Hi All,? Dredging up this old one as I'm starting to plan out my scratch build uBitx. Did anyone try this and confirm the results? 73 Nick VK4PP

*Strangely enough, bypassing had little effect. I fitted a 150pF across the primary of T11 (output trans. wound 2t : 4t) and this made a huge difference.? 28MHz is now down about 1.8dB. Bottom end is

can this be adapted to small tft displays? the cost of going from a 2.4 inch to this display is quite high. - f jjpurdum@...> wrote:

I decided to start building my V3 uBitx I had since February. I was going to build It in a case but hobby funds are low at the moment so I decided to at least get the basics done in the plastic

Try bypassing the 11R resistors with 2000pf to 3000pf. Should make the equivalent to 2 ohms or so. Good work, by the way. Marco - KG5PRT