开云体育

Hi all, This to me is the mos important. I have learnt SO much in the last 12 months from the uBitx. More than my FT-450D could ever have thought me. You know, and I'll make a board the fits on top of

I' had the same. After frequency correction made BFO, after this steps the side bands has come to the right position: LSB on 40ty and USB on 20ty My correction for frequency: 18, BFO-11996380. George

uBitx v3 board. I can't get the LCD display working. I've tried two different 1602 modules with the same result. (The second one, white-on-blue, shown below). It's lighting up. Top row blank, bottom

Ok thanks, if I get I'll try to use. Allso good BFS17. George UR4CRG/RX3ARG

Allison Well said. Are we ignoring the possibility of using series LC traps to suck out some of the bugs (bug traps...?), 8-) Arv _._

We probably shouldn't feed the trolls, but... I agree. I remember the 60's and 70's gear (I was first licensed in 1961 as a Novice). I'm sure those WWII surplus ARC-5 transmitters weren't very clean

My position is its got bugs.? So what. Fix the worst ones.? The low pass filter issue has several fixes.?? Spurs if you stay under 20mhz they are generally not a big deal. So you didn't get 10M

Allison: Yes, I understood that. Howard

I had a problem long time back with K1 not operating correctly. Some others have had this problem too. Took the cover off, might be interesting to see construction. Its hard to see in the pictures but

Howard, For harmonics 20M may be problematic and a working low pass filter solves that. For spurs its 20 and up.? Low pass filters do not fix that. Allison

Howard, I sorta agree.? The bulk caps should be retained if only relocated. The center tap vs bias transformer goes both ways.? in some cases the bias transformer keeps DC out of the output and aids

Fabian, All the ground cables have more DC and RF resistance then the aluminum plate! As a result they look impressive but mean nothing. The board has 4 mounting holes each is ground so if mounted to

You are witness to the dumbing down of ham radio. I agree 100% with you. Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ Sent: Monday,

Depends on what band and how big the fan is.? Seriously it does require moving air to cool it. I wonder how many are in tight boxes and cooking the finals.? I never noticed frequency stability

To low res to blow it up to 200% and at the current size its really poor (fuzzy) to read. I'll sketch it on paper and shoot a picture if I get time.? Either that or start all over in Impress. Allison

Cheap, fun, accessible little radio projects like the bit x and the pixie, that get shat on all the time. even with all of their problems and lack of bells and whistles, (or more likely, because of

Everyone is entitled to their own opinion,? no matter how dumb they may sound. And that's my opinion. -- Lee - N9LO?"I Void Warranties"

Warren; I've seen collaboration. learning, strangers supporting each other, the funds helping women in India, all sorts of amazing modification, an inexpensive WORKING radio. Simply, a lot of people

I love the Bit and uBit.? It brought some hams to actually look under the hood. A legacy of Heathkit? I got my license in 1961.? Because of Ham Radio, I went on to college and struggled for a BSEE.

Warren, don't forget the very positive moral of the "stone story":? I think the uBITX has been and is a wonderful educational opportunity for all and still is a great value rig to use on the air. In