开云体育

Hi Jack, Patiently waiting for the JACKAL board to be released, have the space, display, teensy, and audio board,? but just wondering if you have included CAT in your new software.? Seems I've

I have one of his cases and I think they are junk! Miss drilled holes, poor layout, way to much paint making for poor ground connections, and a bunch of extra parts and connectors that are not needed.

Andy I was able to observe your uBITX status very easily because of the .btx file (you sent) I made my uBITX the same as your uBITX as shown below. 01. 02.This is the part you set for CWL, CWU

Virtually everything done with the Arduino is C++. Every installable Arduino library is built as a C++ class.? Many of the C++ standard libraries are not included or have been replaced by trimmed

Sorry, Arv and Group. Should have clicked "Reply To Sender" ... mea culpa. 73 Dex, ZL2DEX

Thanks, Mark!? I just tried FB messenger.? I'll give it a few days and see if he responds.? If not, seems like PayPal complaint or credit card dispute are the only options left. 73 Mike KK7ER

Charlie His name is Joe Basque, VE1BWV Here is a youtube link https://www.youtube.com/watch?v=MU4ehLk1I2A <https://www.youtube.com/watch?v=MU4ehLk1I2A&t=28s> &t=28s 73 Art N2AJO Sent: Tuesday, July 3,

Looks easy enough. But, I'm wondering just how good the audio is on the V4 board with the new 3 transistor audio amp. Is it worth having ? So Few new V4 boards out there. I know of one not far from me

I saw a post recently (cant remember where ) of someone who is developing a tft file for a 7In nextion…cant find it now, but the 7 in displays are becoming much cheaper and could be mounted on top

I don't mind waiting? I do mind the uncertainty and complete lack of communication.? 73 Mike KK7ER

I used to use my teeth aswell until stripping wire one day broke a chunk of tooth off. Now use my thumb nail and finger Adrian

In my experience, he's more likely to respond on Facebook. He posts there in the uBitx groups now and then. I had ordered a case in late March and shortly thereafter he announced a couple new colors

I've always used a small pen knife kept very sharp.? It takes a while but you can feel the difference between the insulation and the wire underneath. I just hold the wire and roll it with my thumb

forgot to give credit to Ian (CEC Firmware) and Allen (3.5 LCD files).? Both have enabled our community to embrace new Ubitx capabilities 73 art N2AJO

I kinda cheated... my 20x2 LCD was mounted above the Lexan, so I repurposed some of the holes and left the others there.

I can vouch for the size increase with C++.? When I was teaching C and just getting my feet wet with C++, we did a direct comparison.? The results showed a 1.5K executable for C and 80K for C++ with

Kees I placed a photo of my 3.5 Nextion, CECs firmware 1.094. It is installed and running on a Ubitx version 3.Nextion has a list of 3d bezels for each size with downloadable stl files. I ordered a

Oh, brother, I'd not thought of that either.? Is that how this rig works in CW mode?? Yikes.

I use my teeth.? I gave up trying to find a pair of strippers that would strip the insulation while not taking a few of a braid with it.? If it's really hard insulation, I'll score it first. I'm

I have an old pair of strippers I keep around for fine wires. They are like these: