开云体育

Jerry, Drop me an email I have a few questions off line. Allison

Why not fix it? Allison

RE: slip sticks.. I have three.? A Pickett aluminum in the desk here.? Next to it is the bamboo K&E long triple log. And a little 6" Pickett in a wood and glass shadow box on the wall with the sign

I will be starting to assemble my uBITX after the case is delivered on 6/1. ?I received the uBITX on 4/18 and have been waiting for the case to delivered from India. The board I received is marked

You probably need to adjust the BFO to make it sound more natural.? The BFO calibration is in the Setup menu list. Dan, W2DLC

You can’t discriminate down to zero Hz unless you tap off at the right point with a DC amplifier. The AC coupling provides a high pass filter that will block the signal above some frequency. I built

The sound from my uBitx has no bass. It sounds like an ancient mini-transistor radio receiver. Is the speaker from the Inkits case so bad?? My Youkits HB-1B on the same frequency and small external

Easy enough to place the BFO at the center of the 12mhz crystal filter, then the near zero hz beat comes through strong as ever. In the equations of post? ??/g/BITX20/message/44278

Nextion LCD User and all I released the version (V1.080) and experimented with various things. from the beginning of uBITX firmware development, there was a request support for Nextion LCD. Since

ALTERNATIVE ? *?* *Dr. William J. Schmidt - K9HZ* ? *From:* [email protected] [mailto:[email protected]] *On Behalf Of* Mike *Sent:* Wednesday, May 30, 2018 11:21 PM *To:* [email protected] *Subject:*

BTW on transmit you get the transmitted signal spectrum. Quite nice! (I do reduce the gain on transmit!). FreqShow runs on a Pi… needs to be moved to a Teensy. Dr. William J. Schmidt - K9HZ J68HZ

To my eye, it looks like parallel, though I'm left wondering how they'd mount. The RDs would have better 10/12m performance, the IRFs better at 80/40m. Not quite sure on biasing/static currents, but

I got mine today! Yee-Haa! Jack, W8TEE

Sarma, by strange coinci?ence our labs requiring all those computations were associated with wavelengths of spectral lines of substances at room temp then cooled with liquid nitrogen. Email from

Has anyone ever gotten the I2C LCD display AND the Si5351 clock chip to operate on SDA2/SCL2?? Looking to get that running on a Teensy3.6 if possible.? Any help from the group would be very much

Thanks Doug, I followed your instructions and was able to make several FT8 contacts yesterday. I wonder what the 1K resistors are for across the audio outputs. Can they be eliminated? 73, Dennis W7DRW

Interesting, I will have to look at this at a level that is more than casual. I was thinking that one would be discriminating to the limit of zero Hz. I do like the idea of the Nano or Uno or...

"Mike aka KC2WVB" <rb5363@...> wrote:

Hi Richard, Are you interested in selling that burned up board? I am looking for something else to experiment with. I would be interested in the board and Raduino. Please let me know if you are

This mod works great!. I have been using it with a similar upconverter / dongle with the SDR software for several weeks--- works very well... The tap / place Gregory found is perfect and the pictures