开云体育

Howdy Raj, Well over half a century ago when I was 13, I wanted to build an oscillator to practice morse code. One of the men at my church was an EE and also a ham (he also had a really cute daughter

Hopeffuly you see this Jerry, its just for you. but anyone might find this usefull I hope.? Frequencies on 10mhz lsb Clock 0 54.98977 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?

It went from shipping Monday to being Stateside today! WOW! DHL does not mess around! If this was UPS or USPS, it would still be in Europe! It will be next week or the week after before I get started

Problem is the mikes have a 2.5 and 3.5mm jack. I ordered some 2.5mm females, but didn't pay attention and I received the SMD type. The barrel from that is even shorter than the 3.5mm ones that came

Thanks Doc.... 73

David It seems that there is a communication problem with uBITX that communication error occurred in both reading and writing. If you have another computer, would you try it again there? The top

You could mount the jacks from the kit into 2mm thick sheet of plastic.? -- Jason Schlager KM6AUS

Correction: File name is ubitx_20.ino ? and You can manually choose the wrong sideband (ie, choose USB for digital modes on 40m). But it will jump to the "correct" sideband whenever you tune through

That switch selector is hilarious. Imagine wiring that up to the uB. We’re gonna need more Arduino pins for that bad boy lol Joe

Use the source, Luke! Bands below 10mhz are traditionally LSB.? Bands above are USB. At line 420 inside Farhan's original ubitx_20.iso we have this scrap of code: ? ? if (prev_freq < 10000000l &&

Also here: /g/BITX20/topic/12897964#42892

Is this a linear or logarithmic pot.? I think probably linear but I need to get the right replacement.? Having trouble getting a knob to fit want to go with the knurled shaft instead -- 73, W9KJO

You are doing what I would… Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa Grand

Hi Group. Anymore updates on this? I have received my components and plan to do the following: RD16, BN43-3312 (4:1) with 330pf mica, 820ohm feedback, 330pf on R87/88, Re-bias 250-500ma?, 13.8v and

I wish I could remember which post covered using switch boxes for cases but this one was perfect and only $4 from an electronic surplus store. My radio literally just arrived this afternoon so I

Just received the case for my Bitx40 from kitsIndia https://amateurradiokits.in/ and it is a thing of beauty and even comes with all the face parts and knobs...... So, today I ordered their case for

It was supposed to be this link Jerry. Sorry Its a hex file.?https://drive.google.com/file/d/140qhLIDZJ_MgM33lB3buVFOVex2F67Ui/view

Hi all Here's my take and partial solution.? I've got an issue 1 Ubitx number F20/1, it's used receive only at the moment, the only suitable speaker I have is a 4 ohm oval from an old amplified PC

Well, the link was supposed to be the hex file of the original from Farhan.

And not sure why, but I cannot find the original message posted. It had a link to this video?So I'm posting the links to both of my Si5351 uBITX measurement video.? Direct measurement Clocks 0, 1,