开云体育

I've always had long delivery times from them and their on site search shows no KF2510 connectors even now. If they have them, I can't find them. Jim

Sorry...... That's not the Tayda I have ordered from? I have never had Tayda take over? a week?? And yes they also sell on eBay with Free Shipping. But the eBay prices from Tayda are more than

They were actually out of them when I ordered these. It usually takes me just as long (longer sometimes) to get stuff from Tayda as it does out of Hong Kong or Mainland China and it's the same exact

Don't Forget Tayda for all Molex style connectors and pins and headers! What a deal they have! Mike, WA6ISP -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID

I have just the 8 pin ones, not the 2 and 3 pin.? I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere.? I

How many do you need?? 8 wire?? I have a bunch for the uBITX that I'm not going to use.? I have a goodly handful of 8 wire female plugs with wires already attached, color coded ALMOST like the

For uBitx and Bitx40 connectors, google for "KF2510" Originally by Molex, I believe. You will likely be adding the wires, I haven't seen complete harnesses, but then I haven't looked very hard. Here's

Hi Walter, Michael Hagen gave you an answer but you asked for a schematic so here is a quick, down & dirty representation of what N5IB was talking about - it shouldn't be too difficult to add to any

Ok Thanks? That clears that up -- 73, W9KJO Walter

Well, the Encoder is usually handled differently on UBit vs BitX. When changing from a pot to an Encoder on BitX,? I went for the interrupt routine method. I added 10K pullups and 0.01uF debounce

anyone know where to get replacement harnesses for the bitx40 ... ?

Hi Mike (VA3MW) Times definitely have changed, and yes, today anyone in Canada can buy, import, sell, own,? -a radio transmitter without any restrictions (using it without an applicable licence is

Is this for the MBITX? Could someone draw this up?? I'm not sure I understand what is being described.? A little schematic would clear it right up. -- 73, W9KJO Walter

As N5IB said, the ALPS information is good to know. I've been involved with the "RadI2Cino" pretty much from the beginning and the 10K in series with .01uf to ground (.1 on the ones I've built

ALPS, a maker of rotary encoders, recommends 10K pullup to Vcc, then 10K in series with 0.01 uF to ground. The internal pullup in the ATMega is loosely specified - somewhere in the tens of K, max

Thanks Mike. 73, John

Wonderful work OM Mike. We all appreciate your efforts in real ham spirit. If I find anything interesting I will point it out for you. Thank you for your great work on consolidating knowledge from

Upgrade the software ... there are two variants discussed on this list.? Ian Lee KD8CEC software should fix your problems and requires no hardware mods. If not, this will be because the resistor

It looks as though Comcast has blocked groups.io for its customers.? Hopefully, it will be fixed soon! Ron W7HD

Correct. I noticed that when I was wiring it up, but had forgotten this. Philip, G7JUR