开云体育

No, it should not get hot.

For some reason, Tayda calls them "Serie 2500", not "KF2510".? ? https://www.taydaelectronics.com/connectors-sockets/wafer-housing-crimp-terminal/serie-2500-2-54mm.html (

Hi Nik, I have two questions for you in regards to using the TPA2016 module.? First question is are you taking the audio input to the module directly from the volume pot wiper? That was my take on an

"Multiple speakers and headphones have been tried with no improvement."

Have you tried a different speaker. Clark Martin KK6ISP

Thanks Mvs Sarma. There is no change at 12V. Does the?TDA2822?normally get hot?? I have some spare LM386s here, but I have not looked to see if they are directly swappable. (I have never used

Also limit the power supply to 12V while testing the audio in RX. Regards MVS Sarma

why not try replacing the TDA2822. !! Regards MVS Sarma

Hi All, My uBITX has arrived and went together with no issues. I have a question about the audio stage and a potential issue with my uBITX.? At LOW volume levels, the RX audio is smooth and sounds

Check to see that your messages are not being directed to spam. One time I clicked the wrong "Move-to" link and set it to Spam. After that, I was removed from subsequent mailings. Look for a message

All Denouncing and pullups are also possible in the firmware. This is the method I use in the QRP Labs kits like QCX http://qrp-labs.com/qcx - look at the schematic: no pull-ups, no RC-debounce.

The only time it has ever taken more than a week to get a Tayda order is when the USPS misplaced it in Denver. Someone must really dislike you! Vince.

I’m on several groups.io groups and have been receiving messages regularly. Perhaps the problem is localized. Clark Martin KK6ISP

Ordered Dec-23 Got today via DHL Smoke test went good, starting the build. -- David ?N8DAH Kit-Projects.com ( http://www.kit-projects.com )

sorry half reply I do agree the suggestion of Mike to use 0.01uF . If you use 0.1 perhaps the capacitor recovery time will not allow you rotate faster. regards sarma vu3zmv Regards MVS Sarma

i AGREE WITH Regards MVS Sarma

I was interested in Karl K0MWC's suggestion to use a PE digital attenuation chip to address the problem of variable power out on the ?BITx.? (Refer: /g/BITX20/message/42298).?? I

I'm glad we've been pretty good about leaving you alone as I'm betting quite a few people here have also been on what I call "the burn" of running ragged to make something happen. See you when you

I usually get my orders within a week. For the connectors, you need to look for the 2500 series wafer

I kinda have to agree with Mike. I've bought a lot of stuff from them and it's usually here within a week and their prices are really good. I do know they have a distribution facility in Livingston,