开云体育

Disgusting Scrooges and Grinches Most authorities these days would make you pay to breathe.

*This might be of interest to those trying alternate FET's or just trying to improve response of the driver stages. This is a sweep of the driver stages in my uBITX. I disconnected the input to the

So I'm a big proponent of getting younger people involved in ham radio and to that end, I support the YOTA (youth on the air) initiative. To that end I like donating time and radios to that cause,

See if you can order it from VU ebay or

As I remember my uBitx with everything wired correctly and 4.7K omitted the board would go didahdiah indefinitely. One board came with a defective USB socket which I fixed. After a 10 days stint

Thanks for updating the shipment status. I ordered on Feb 04. Still wating and exciting to work on uBITX. E21TUX

Thank you Eric, What do you think about this heat gun on eBay? 110V 300W Hot Air Gun Hand Hold Mini Heat Gun for Embossing Heat Tool $10.76 https://tinyurl.com/y7vrbfvt Or should I buy a $20

Thank you Jack, I ordered a SMT SMD Component Welding Practice Board Kit US $0.99 http://tinyurl.com/ya7l9hym Question, could I use this tape: Self-adhesive Tape Soldering High Temperature Heat

Yes but the difference, at least for me, is that I’ve used the AD8367 in designs before so I know the quirks and benefits of that part. I’ve never used the PE3412 but I sure will give it a try.

Jack, We have decided to go down this road also, we got a 5 pack, and hot air station, going to do a toaster oven reflow oven, and maybe a George Forman preheat grill…I am working on some ideas for

Sorry about that. See ebay #192343157603 and picture at bottom. Jack, W8TEE To: [email protected] Sent: Tuesday, February 20, 2018 11:23 PM Subject: Re: [BITX20] RD16HHF1 in the uBITX

Hello Jack, With three of what? No picture (: The whole thing cost $2.29 with free shipping! URL please. 73! George VE7WQ Tuesday, February 20, 2018, you wrote: JPvGI> I've run into the SMT inertia

I've caught it too, based on this group.? I ordered several of the above (and couple of the easy ones too) and am going to play and see if I can add "SMT capable" to my meager soldering

I've run into the SMT inertia as well. AT our club meeting next month, I am setting up three solder stations with three of these: and I'm going to have the members each solder as small a part as they

#3 sweeper version. this is good dave n4lkin

Tough for many to work with because they won't. Homebrewers are going to have to? learn a few SIMPLE and CHEAP tricks to solder devices like this. I've been using this process for several years

You can always buy the board for a little over 17 Euros.

Fantastic work, Nik. I’d definitely be interested in 2 or 3 smd or th boards, unpopulated. I’m curious to see how the 8307 fares. In my experience they need a fair bit of shielding. 73 de

or maybe just a front panel knob to do "power level"?? Heathkits had one of those..... In this case, it might have to be RF, but if you went with a composite logarithmic, stepped the gain of the TX

The best solution would be to get the transmit power amp chain to behave, giving uniform power out across the bands. Failing that, the PE4312 attenuator would be good, though a tough package? for