开云体育

As long as you're going to replace it, you might check to see if there is an I2C versions, or at least add that board, as that would free up some I/O pins on the Nano for other things. Jack, W8TEE

are you still able to receive? does it transmit now? current doesn't always go to 1 amp. That can be adjusted by RV136. This is the drive level. how much output power are you seeing? Marco -

Michael, and others... Much of the present day Raduino software uses EEPROM to store variables and readings that do not change often. This facilitates using that memory for long-term storage and

I check current of transceiver. Whole transceiver in transmission mode, when speaking - 0.85 - 0.9 amp , PA only in transmission mode, when speaking -0.55 - 0.6 amp. This is in top position of RV136

How would an Eprom become scrambled ? wrote:

Which version are you having problems with ? I am currently using CEC 1.01 and the only problem I'm having is SSB seems to be off about 500khz . I assumed it was something to do with the Raduino

Almost - you'd have to solder on whatever type connector (male pins or female socket) you'd need to mate with your Raduino but otherwise it should work just fine. Order the 5 volt option as 3.3 might

For Mike check message#27568 jjpurdum@...> wrote:

I didn't find the uBitx Manager but I used a sketch to clear the EEPROM and that solved the problem. Now I am going to reload Ian's firmware and continue to play. Thanks Mike, Ian. -- 73, Yvon NU6I

Everyone. I have a BITX 40 who is plagued with the frequency shift problem during transmit . I know there was answers to this problem on this list list before. I understand their was a solution to

Is this plug and play for the raduino? 3.3V/5V 16X2 1602 Character LCD Display, White on Black,High Contrast US$2.80 In

I was rechecking everything and find my own mistake. I reverse of polarity of connecting RADUINO VFO to main board. Very strange, but receiver works find with this connection. But transmission was not

I use the AVEN 17010 Adjustable Circuit Board Holder. It’s cheap (although not as cheap as this excellent idea) at $12.50 from Amazon prime. I like it because it gets the board closer to my eyes

This doesn’t have to be so painful. There are good solutions: 1. There are several replacement technologies for the Raduino offered by people on this site. You have the option to buy one

Ivan, You are correct. Q 13 seems fine. Since you tested the PA, we need to work backwards in the circuit. Looking at the schematic, Q4 is next, when transmitting. Check the voltages on Q4. If

I noticed that several people have posted the need for a Raduino board.? I have a Raduino board, marked 944/10 in ink, with 8 pin cable for sale.? I am not using the board as I am making my own

SUPER!! I hope more people will follow your example. (Love the board holder!) Jack, W8TEE To: [email protected] Sent: Sunday, February 11, 2018 12:10 PM Subject: Re: [BITX20] Raduino seperate

Thank you MIke and Ian. The eeprom was my first thought but I eliminated it thinking that it would be initialized each time you load a different software. Where can I download the uBitx manager

Thanks, Jack, Yep, been working on my SMD soldering skills... Just waiting on my SI5351A's to arrive. I have all the rest. SMD soldering skill training progress here... Bernie, KC9SGV

Tim, the AF potentiometer deliverd by HF Signals with the BITX40 kit has a value of 10k. Am 11.02.2018 um 15:39 schrieb Tim Gorman: