开云体育

Hi Walt, You would use the function switch, built into the encoder, to go into the menu and select USB. That is all that has to be done. Marco - KG5PRT wrote:

Having put together the bitx40 and enjoying that I decided to purchase the ubitx. I don’t ?see any posts on USB on 60 meters, how is upper side and selected on this band. In the documentation it

Don't know if this helps or not.? When I saw VNC I remember running across an email this morning about this very subject.? Pi Magix (

?Jim you are SOOOOOOOO right! Gordon It is little things like this that can foul up newbie adopters. gordon ________________________________ Sent: Wednesday, February 14, 2018 8:59 AM To:

Another error on the Wiring UP diagrams (all of them) show the CW Key connected to pin 2 of the key jack. Pin 2 is the RING terminal, not the TIP. It is customary to connect a straight key's

What's different between the two versions?? (I didn't notice anything at first glance, and I'm still short of coffee this morning.)

I have had success in selecting a section of the schematic on my desktop, enlarging it and printing that section. I did it with the Q14 Q15 section for ease of viewing and a help in troubleshooting.

a better one

here is the ver3 sch in PDF ?you can blow it up tio a maximum level. ?Hope it serves the need. regards sarma ?vu3zmv

Hi, Ordered 16th December and arrived in Germany just 24 hours after shipping and now at last Red Letter Day, it took the Customs in Leipzig 2 weeks but finally cleared customs and I have my

Hello, Kevin. Try zooming your browser while looking at the hfsignals BITX40 Circuit Description page.? At 150% it's quite legible.? You can also right click on the schematic, save the images, and

Bob, Same as B40. I have used the standard pot so that I can use the 1/4" shaft knobs. Almost any audio taper pot from 5k-50K(A) should work. You could repurpose from some speaker amp or defunct

What is the shaft size on the provided audio pot in the uBITx?? It was 0.16 in the BITx40 but pictures of the uBITx parts make me think it might be different in the the uBITx.? I'm trying to get all

having trouble with email. this is a test.

Kevin Right click on the image and "open in new window" Mike -- Mike Woods mhwoods@...

Hello all, Replaced D7, then found fuse blown. Replaced fuse, applied power, and raduino display lights up.? Rotating the tune pot changes frequency.? Only problem that is evident now is an

Nik I also tried to erase it first. I wish your project a success. Ian KD8CEC 2018-02-14 12:21 GMT+09:00 Nik VK4PLN <nickpullen@...>:

Hello Raj and all, Thanks Raj, I did indeed find that D7 was blown.? I unsoldered it from the board and tacked a 1N4148 in its place, paying due heed to the polarity of the diode. I had taken the

Hi again. I think also the hardware hack version can save space by moving the keyers to dedicated digital pins freed up from the LCD to I2C mod. we can then remove all the analog input calibration

Hi Ian, Yes, I did run out of space. I removed some code for the default HAM BANDS and that allowed me to include the extra for the I2C lCD and TPA2016... We need to test the hardware hack for the