开云体育

Dave, Now upgrade to KD8CEC firmware and you will be amazed.

Its 4mm. Philip G7JUR

Wow...nice job! Jack, W8TEE To: [email protected] Sent: Wednesday, February 14, 2018 12:47 PM Subject: [BITX20] My uBITX is alive!! Everyone. Last night my uBITX took ti's first breath of

Ashar, I have done this, and LSB is USB to 10mhz, Then changes to LSB above 10mhz. Amazingly ! .

I did order one of these boards how long to the take to come I cancelled my ubix order the other week so its not like I need it now chris G0WFH

Got good news from HF Sigs that my uBITX is on the way. I ordered Dec 20 -2017 and got the PayPal shipping advice on Feb 11 th. I originally asked for DHL, but asked to be sent India Post . DHL is

Testicle 5-9

Looks pretty good David, but where you have the Raduino mounted to the display and mounted off the main board, you really should rework the cabling a bit and use miniature coax for the Clock 0, Clock

Everyone. Last night my uBITX took ti's first breath of life. Even worked a couple of QSOs. Attached are some pictures. Please note that I installed the 4.7K resister on the radinio board for CW pull

Hi Walt, You would use the function switch, built into the encoder, to go into the menu and select USB. That is all that has to be done. Marco - KG5PRT wrote:

Having put together the bitx40 and enjoying that I decided to purchase the ubitx. I don’t ?see any posts on USB on 60 meters, how is upper side and selected on this band. In the documentation it

Don't know if this helps or not.? When I saw VNC I remember running across an email this morning about this very subject.? Pi Magix (

?Jim you are SOOOOOOOO right! Gordon It is little things like this that can foul up newbie adopters. gordon ________________________________ Sent: Wednesday, February 14, 2018 8:59 AM To:

Another error on the Wiring UP diagrams (all of them) show the CW Key connected to pin 2 of the key jack. Pin 2 is the RING terminal, not the TIP. It is customary to connect a straight key's

What's different between the two versions?? (I didn't notice anything at first glance, and I'm still short of coffee this morning.)

I have had success in selecting a section of the schematic on my desktop, enlarging it and printing that section. I did it with the Q14 Q15 section for ease of viewing and a help in troubleshooting.

a better one

here is the ver3 sch in PDF ?you can blow it up tio a maximum level. ?Hope it serves the need. regards sarma ?vu3zmv

Hi, Ordered 16th December and arrived in Germany just 24 hours after shipping and now at last Red Letter Day, it took the Customs in Leipzig 2 weeks but finally cleared customs and I have my

Hello, Kevin. Try zooming your browser while looking at the hfsignals BITX40 Circuit Description page.? At 150% it's quite legible.? You can also right click on the schematic, save the images, and