开云体育

Correct, a custom clearance fee but there should not be any taxes.

DHL will charge a customs clearance fee and ?HST will be applied to the value of the goods on top of that.? For the BITX40 the extra charges were around $Can 30, so it will be more for the uBITX.

So, this is roughly what I'm thinking for the layout thus far. Here's what you're seeing thus far: uBitx is underneath the PCB on .5" standoffs (Supplied with the uBitx kit). The uBitx itself is 1/4"

Alex: What you are doing is all the right things to find the right combination to drive the IRF510's. Get a hold of and really read the original article by WA2EBY for all the things he discovered

General rule of thumb is no more than 25 to 30% of the total output of the rig. He always control the output by the audio level in and if you can monitor it back off until the alc Barely indicates....

?

So looking at the schematic, it's basically an IF amp (MC1350P, which is obsolete/harder to get, though I have gotten them from Jameco before) with a dual gate mosfet as the attenuation stage. The

You save on package count with the TPIC6B595. It’s basically an HC595 with 150 mA sink drivers. <http://www.ti.com/product/TPIC6B595 <http://www.ti.com/product/TPIC6B595>> Clark Martin KK6ISP

Alrighty, was just thinking about the duty cycles and such. Would make sense to just back off the input gain. -- ---------- N5WLF, Greggory (or my nickname, Ghericoan) General Class, Digital Radio

It definitely matters if the BFO is above or below the crystal filter passband. I was talking both transmit and receive in that last post, but the math is the same regardless of which direction the

OK, here is the file to use for laser/cnc cutting of the case I made. I cut in out of 1/8" (3mm) MDF. Since that is a little too thick for the supplied? jacks, you may need to glue the jacks into the

Greggory --- it won't be nearly the problem you're thinking.... Just tone down the audio level into the mic if you want a lower power level. With single side band, that proportionately reduces your

I have yet to get my ubitx yet, as I am on the preorder list. But I was wondering if there is a way to back the power output down to five watts to save the heat stress on the IRF510s. I am looking to

Ref: Item 6 (Keying interface for a linear.) http://bitxhacks.blogspot.in/2017/12/adding-external-linear-amplifier.html

I ordered one the 15th, I have no clue when it will come in. I was hoping for Christmas but knew it wasn’t likely. Oh well, gathering a lot of good info on this list and looking forward to when it

Andrew You shouldn't be dinged for customs as we have an exemption up to a limit. 73 Ken VA3ABN

Hi all, I'm working on my uBitx which is completely homybuilt, so not the currently sold PCB version. By building it from scratch you encounter a lot of interesting things and learn a lot about it.

Figured out what my plan was on that front. I want to re-use as much of the raduino as possible, so one thing I did to make my life easier was to use a 74HC595 shift register, frees up IO's, and uses

There are many 3.3v 16 X 2 displays advertised on Ebay. Practically giving this one away.

I ordered mine on the 12th of December and it's due here in VA3 land on Jan 3rd. I ordered it and had it sent DHL for Christmas and later on found out they were previously sold out. If I'd known they