开云体育

My apologies for the bandwidth, I've now found the information I sought. Ross

I've delved into the backlog of posts and found myself unable to ascertain whether there are any pcbs to be had.? Very interested in acquiring 2 or 3. Cheers Ross

Just a reminder! -- John - WA2FZW

Hi, I've just released raduino v1.27, download it from https://github.com/amunters/bitx40 ( https://github.com/amunters/bitx40 ) New in this release: * Improved the suppression of the spurious carrier

Good Evening! What is the nomenclature on the Q13—need to try that replacement to see if the power picks up...only ~100mw now, if that. 73, John/N6VTS

Correction for Daylight Savings Time A new net devoted to Makers (DIYers, homebuilders) has started up on Echolink conference node 9229 (*TECHLINK*).?All those interested in building their own

A new net devoted to Makers (DIYers, homebuilders) has started up on Echolink conference node 9229 (*TECHLINK*).?All those interested in building their own “stuff” are invited.?The net is on

Thanks Guys, I think Jack is away on vacation at the moment so will wait until he is back. Dave G8PGO

It is my idea to conforming a modular rig. My design requirement: Main board have to be < 100 x 100 mm to use a PCb manufacturer discount as a prototype. All the module have to be the same size

Mike thanks.. Did that (on the way to the speaker...will have to get it so that if you plug the headphones in it will filter that too.. haven't tried that yet.. works great.. Dayton purchase 10.00...

This is my answer to the usb cable extension.

I'm not sure about the website. I've never heard him mention one. Jack is very active in this group, and the board was shipped quickly after I ordered it through PayPal. It is a fun project - Just so

Does Jack have a website for this or is it all just through email? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton,

I am interested too. Looks like a fun project. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner –

Hi Dave,? I'm fairly new too! It's a lot of fun in here. ? The docs for the B40 mods from W8TEE are in the files section. Search for *B40AssemblyManual04.doc*? as that's the most recent version. ?

Hi All I am very new to the group and the BITX40 and have been looking at the mods and other enhancement. Are the W8TEE TFT/VFO and AGC, CW and speech proc, still available and if so where do I get

After some code investigation, I discovered that the RTC does not use an interrupt, the clock is polled and updated every time though the Arduino loop which turns out to be between 4 - 6 per second

I had to look that one up... This is a narrow audio filter, (probably) centered around 750Hz, and a (switchable, down to a) VERY narrow 80Hz bandwidth. You would place this at your BitX Audio output,

Hello. Thank you John and Willy. I just ordered one from willy's Ebay link. And since it's the same female connector as my SDRplay RSP2, it's even more convenient. Thank you and have a good day. 73

I actually had to remount the 10 turn pot on a bracket and use a shaft extender on it when I added the right angle USB connector. For those in the process of building, plan ahead a little and you can