开云体育

Thanks for all of the input guys! ?Luckily, I have access to a machine shop where I work. ? So I am a complete noob when it comes to all this, so the linked chart on tap sizes is greek to me. ?I am

All: Attached is an updated assembly manual for the TFT/VFO PCB I talked about at FDIM. Read the manual completely before building the board. I am also attaching the code for the TFT display and the

On the use of cutting fluids-? different metals require different cutting fluids.? I use tapmagic brand (USA),? the no#1 tapmatic(yellow) is for ALL ferrous metals. The no#2 tapmatic (red) is for

Sending Photos did not work? Do it this way.

This is yet another Raduino PCB designed to add some features. 1) I wanted to be able to plug Nano in and wanted the USB connect next to the side of the cabinet so I can program without taking the lid

Hmm. ?Where did I (or somebody) say 35-40ma? It's possible I did. ?(That's about right for my KD1JV MTR transceiver.) But if so I would have been wrong. Jerry

Have added mine. Phil - G7BZD

Added Art N2AJO Sent from my iPhone

Jerry and all, I've read all the answers that you sent me and others about the power usage for setup. My question is: Farans instruction (part 8 second bullet) say:: * "Switch on the transceiver.

In addition to a function switch, probably want to also remove C91 and C92 as mentioned in Allard's operating instructions.

added Andy

I noticed that to enter my data, my Firefox didn't work, but Chrome worked very well. So if you are having problems entering yourself on the map, try Chrome.

you can find me to

There are at least three ways to flip between LSB and USB operation. Could drive the BFO from CLK0 of the Si5351 as mentioned here by Allard (but not yet implemented in his sketch):

Thanks Raj. You reminded me that I also used to do the same. I also used to wire a small lamp with a 4.5V battery (flat battery pack with 3 cells. who remembers them) and used to read the morse from

Great idea! I'm added. KK6RPX

Hi Colleagues, the best for all. Farham a question for you. What is the best option to change the side band from LSB to USB and vice versa if I want to use my rig in PSK or other mode I need. I

Don't forget that the Teensy also has internal audio processing which makes an ideal candidate to drive the bitx for digital modes as well or even custom audio filtering. I might just replace the nano

Jim, Switch to topic view and make things easier on yourself /g/BITX20/topics ( /g/BITX20/topics ) the map is at

Would someone please provide the link to the map again. Thanks Sent: Saturday, June 10, 2017 10:05 AM To: [email protected] Subject: Re: [BITX20] add yourself to the new BITX operators map A few