开云体育

$190 seems a tad steep. Jack, W8TEE To: [email protected] Sent: Monday, May 15, 2017 6:08 PM Subject: Re: [BITX20] SMD 20M BITX20 Pacific Antennas (QRP Kits) is still selling the kit version

I ordered a BITX40 on 5/9/17, it shipped on 5/11/17, and just received it today, 5/15. Paid via PayPal and took the DHL option. I was shocked, actually. Six days from order to receipt in Northern

This sounds suspiciously like the linear region oin the IRF510 is flaky. You may need to change the final transistor. But first, verify that your PA voltages are all good, stiff, and consistent. This

Mike: At present, there is no smd BITX20 kit available. As mentioned by Leonard, the Eliamady smd20 kit was available some time ago. It is actually a 3-mode multiband core unit, and can be adapted to

Move the wire from p3-1 over to p3-2 and change the sketch to point to A6 vice A7 and retry. v/r Fred W4JLE Sent: Monday, May 15, 2017 17:41 To: [email protected] Subject: Re: [BITX20] Raduino

Pacific Antennas (QRP Kits) is still selling the kit version of the bitx-20 complete with case. ANG

Just remove C91, C92, don't bridge anything. ?I would do it using two fine tipped soldering pencils, one on each end of the cap. ? Do you have 0.1uF caps at both ends of your that tuning pot

I updated to Raduino v1.11 and it is working pretty good. The birdies aren't gone but minimized fairly well. A couple of things I noticed, though: 1.) The Tuning Range doesn't always stay where I set

I tried both 10k lin and 20k 10-tur pot. No luck. I guess I burned Nano somehow. :)

No need to touch sketch. You can change settings with function button.

My apologies. I meant Brian. Marco IZ0QRF

Hi Zeff, as for the Bourns potentiometer, mine was some light blu stuff marked Bourns ,made in Mexico , pretty suspicious since I bought two of those on Banggood.Long story short, one worked fine for

With the v1.09 can you replace the sing turn pot with a 10 turn pot without making any changes to the sketch?

All that old Yahoo stuff has been copied to this forum on groups.io Here's the very first post from early 2004: ?/g/BITX20/message/1 ( /g/BITX20/message/1

Also check the old posts and info on the original Yahoo Group at https://groups.yahoo.com/neo/groups/BITX20/info ( https://groups.yahoo.com/neo/groups/BITX20/info )

I've used the NewTone library (https://forum.arduino.cc/index.php?topic=143940.0) to directly drive a small 1.5" speaker after the LM386 as a sidetone and it works fine. Jack, W8TEE To:

I doubt even Farhan knows when any remaining issues will be resolved on the uBitx. ?But you are welcome to do a scratch build and help with the process. The Bitx started out as a 20m rig, as the

I'd be interested in seeing what kind of noise or spurs it puts out, too. Wondering if it will meet FCC regs. 73 de bill

Does anyone know when the uBitx comes out and doesnt the current bitx have poor gain on 20m due to the transistors [email protected]> wrote:

Ive done some more fiddling and im not sure i understand whats wrong here. I get 2-3 watts output when i blow into my mic, while talking i basically get zero even when yelling into it. I can *sort