开云体育

Bob: All the messages "Depercated..." mean that "We aint using that anymore in this compiler" Either get a? earlier library or IDE version which will support those functions, or ignore them. They are

Dear Rob, I followed directions as best as I understood them? and received several pages of of error messages.. see attached pdf.. Any suggestions.. BOB K6YN

Don: First of all, there is little real complexity here. There are numerous relatively simple problems and a host of solutions for each of them. It is daunting to search the list for a solution, but

Jerry, The archeology might have paid off. ?I think this matches what Farhan mentioned and what others call the 'transistor across the cap' fix. ?I'll give it a shot. Picture in our archive from

Your final is working but not enough drive! I don't think anything is wrong basically! The microphone may not be generating enough audio for the mixer! You can increase the gain by putting another 100

Something with the IO groups! Now I am going delete the _._, _._ ,_ below your name and post! There must be some admin options to set this ?

Raj, I left your msg at the bottom of the last but it didn't post sorry. Chuck

PTT on my BITX80v3 is a simple SPST switch ON ?= TX ?OFF = RX ?I am using a $dollar store computer mic on SSB . Cost me a whole $1.25 cdn ( $1 usd ) , cheap ! Seems to work well and a straight key

I adjusted R 136 completely CCW. Now have 4.5 W There is something wrong with this radio.? I'll keep trying to find out what it is. Tnx for your help Raj. Chuck AC7QN

Yea, I got excited and didn't stick around to find out. So I went back out to the shack and let it warm up and it felt like it did in the very beginning. And I was able to get a better feel of it by

I'm assuming that you have a bitx20a. Take a look at http://golddredgervideo.com/kc0wox/bitx20a.htm ( http://golddredgervideo.com/kc0wox/bitx20a.htm ) It might help you out. Leonard

Mark, I strongly agree. I'd be happy to host it, even. But I don't want to fragment things further and ruffle any feathers. Hans and Farhan have done well with this environment. In fact, if you use

If that tuning pot is acting up on one end of the range, it may need to be replaced. ?Sounds like it may have been dealing with the better part of an Amp to or from pin A7, enough for the regulator

Ideally I would have liked to see the group migrate to a proper online forum. Then you could just browse or subscribe to the threads you want. I figured that might be a little *too* much change for

Ahhh. there speaks a cynic.? You naughty boy !

I know, all these people excited about ham radio, what a drag. From the huge influx of newbies you'd think that there was some overly inexpensive HF SSB radio on the market attracting people out of

I have made a video showing basic details of how to upload the sketch in case of glitch causing faulty operation of the unit. This was made to help anyone not familiar with Arduino programming in

Include hex files for those who want to use XLoader too...it makes reloading an Arduino a snap. https://liudr.wordpress.com/2013/03/03/load-compiled-binary-to-arduino-with-xloader/ (

That's very good news! ? I assume the regulator is now running cool, it should hardly get warm at all. ?If it's still hot, you may yet have trouble with the Nano. Jerry, KE7ER

Very tongue in cheek :-) -- Just as you press send, do you notice the typso !