开云体育

A poor quality switching power supply may significantly impair your RX sensitivity. I have experienced that with both sBitx and zBitx. Finally for sBitx (and possibly other future equipment) I have

Hi all, I received my Zbitx a little over a week ago and have not had time to really try it out. I have noticed it seems to be very insensitive to any signals. When I switch over to my ft 817 signals

I have updated the RPi Pico with UF2 downloaded today from https://github.com/afarhan/zbitxfrontpanel/raw/refs/heads/main/zbitx_front_panel_sw.ino.uf2 , as described in

When working in FT8 on my zBitx I can see the spectrum of the received signal, but I can't check if my TX pitch is at the unused frequency. In sBitx it was shown with the red line on the spectrum. I

*Just a small addition:* when we talk about sbitx v3 or v4, it's the hardware version. This is done by the manufacturer, so you can buy it (v4 is currently planned). When we talk about software, the

Visit https://github.com/drexjj/sbitx/wiki to get started :)

Hi Gerry The core 64bit development team and contributors are listed on github :) https://github.com/drexjj/sbitx -JJ

These are just things to think about.? I am making some presumptions here, based on the way I am interpreting emails I am seeing.? If any facts are wrong, I stand corrected. The current 64-bit

Hi, Indeed. I wonder if you can set up the wifi network from a wpa_supplicant in the boot partition? In any case, definitely keep me posted on it. Pretty exciting! -- Buddy Brannan, KB5ELV, WRVB670 -

Is there one place where instructions for swapping to a 64bit pi and installing the V4 are located. I'm an old geezer, but new to this Groups thing, I poked around but only found a lot of fragments to

So I finally was able to chase down enough cables and a micro USB hub to hook up to a HDMI monitor, mouse and keyboard and got it all working along with connection to my laptop over wifi. My question

If you want to see the Pi desktop on a small display, you could try running VNC or a Remote Desktop on your mobile phone, and connect to the Pi via WiFi or ethernet adapter. ?73, Ron, n6ywu

Yep, sure did, it arrived yesterday. Can't do the initial setup w/o sighted assistance though, so have to wait until I can get some help with that, but after that's done, I can certainly either use it

Ashhar, could you please help with a couple of questions regarding radio ordering status. - Will the latest software updates (e.g. CW improvements) be included on zBitx orders placed now? - Are there

HI! I would like to have an option to turn off the LCD and RP pico. This way it would work with an external monitor with less noise and lower power consumption. Ryan Wesolowski via groups.io

I have run mine multiple times without the display connected via no machine. Ryan Kk6dzb

I installed nomachine on my zbitx and on my cell phone so I can run the desktop without a HDMI monitor attached. A little small compared to a full size monitor but it works for me. A question for the

Thank you! This works. Didn’t want to upset other members of the household?

Joerg explained very well why this isn't possible, but I'm curious why you want that option? I *think* (or maybe *suspect*) that you get the RPi Zero 2 W desktop on an external device via WiFi and,

The short answer is NO. The long answer: Currently the sBitx code on the Raspberry Pi Zero 2W communicates through a custom protocol via I2C to the Raspberry Pi Pico, that controls the display. This