开云体育

It was 4 weeks last Friday for me. Should be soon I hope!

Gwen,, I have tried a couple of PD devices. ?Does the cable you found let the zBitx get full power out? 73, Bob KE9A

I am really impressed by N8ME's firmware. It's quite an achievement to squeeze all that functionality into <30K of flash! Thank you very much! I have a slight problem though. The band selector menu

Yes. 1.? ?Congratulations that you got it working on the sBitx (where it was developed).? ? I use a Signalink or equivalent (even homebrewed) and that handles the PTT when the audio is detected on

Gordon, I tried this without success. On the zBitX, connecting to the port called CAT on the top of the unit, I do not get the USB port to get recognized by the OS. I enabled the Serial Ports in Pi

HI Gordon! Yes, I want to do this simple thing. HA8LK Laci Gordon Gibby KX4Z via groups.io <docvacuumtubes@...> ezt írta (id?pont: 2025. máj. 4., V 20:04):

Lots of discussion about DT already here /g/BITX20/topic/112513670 and I've logged it as an issue here https://github.com/afarhan/zbitx/issues/52

This has already been logged as an issue https://github.com/afarhan/zbitx/issues/33

Jim, The usual PD setup for operating a ham radio, since my article on it in QRP Quarterly several years back, was either a mains-supplied charger that supports PD voltages and currents, or a battery

I just downloaded and installed your version on my uBitx V6, and it's much better than the stock firmware, great job! I do have a question, looking through the code, and that's how do I add to the 5

Really? Shipping Chinese 9v power adapters from via DHL? HF Signals would have to import them from China, stock them, then resell them and charge shipping. I think HF Signals is doing the right thing

Can't find who posted this PS but it works very well! Straight plug and use on the zBitx. HFSignals would do well to offer this model as an option. Ronny W4TRI

In addition, I see that the zBITX is currently 1.6 seconds DT when monitored on my IC-7610 that is GPS locked.? I wonder how to correct the clock inside the zBITX even while it is currently connected

Hello I received my zBITX in their 2nd shipment release a few days ago. I have linked it to my WiFi, an easy task.? It's internal clock should be locked and on time now. I then went on 20m to make a

Hi Gordon, That's my thinking also.? If I can get a GPIO Interrupt on key-down working, having that enable Tx Mode would be my first step.? Have not though it out beyond that - I'm just taking it

Was it right at 4 weeks?? I ordered on the 11th.? So I guess I'm about 5-7 days from shipping. Nelson AE5NL

Bioenno has 9v batteries if you want to trust a Lipo pack.

You guys might try putting a big electrolytic capacitor across the output of that switching power supply. Like two or 3000 ?F. Gordon kx4z

I listened to my own FT8 signal. Unfortunately, it wasn't clear. Yvon AE7YD via groups.io <Yvon@...> ezt írta (id?pont: 2025. máj. 4., V 19:56):

I did not noticed it on mine but maybe I didn't test it right. How did you check it? On the reset able fuse, I tested it yesterday night and discovered that it takes over 10A and too many seconds to