开云体育

Courtesy of archive.org, these might

OK, I made a little bit of headway. I learned that holding the menu button down makes it go into a settings routine where I was able to change some of the parameters. I didn't know how to get into

Changelogs should be "trivially" available through the git web interface. That doesn't mean that I personally know where the git repository is or how to display the changelogs. I even bet that certain

OK, that may explain what this mess of components soldered together with a couple of unconnected wires is (photo attached). I've circled the bundle, which looks like a couple of caps and resistors,

Will do!

If so..how? Thanks! Mark

You could just tell us in two lines of text what you found and put in a bug report on Github? ?It might be less stressful all around.

I agree...

Even after the update to 3.052, working with straight keys isn't possible. There are a lot of dropouts. The "dits" at the beginning of the characters aren't sent, even with a delay of 500. This isn't

Even after the update to 3.052, working with straight keys isn't possible. There are a lot of dropouts. The "dits" at the beginning of the characters aren't sent, even with a delay of 500. This isn't

If you have the option to select CW, the radio may have been updated with Munter's fantastic BitX40 software. The attached manual shows the hardware mods needed to operate CW. =VIc=

Many thanks Farhan ! Now it’s on the way to get really fun in CW ... just upgraded v 3.052 , much much better. 73 & 76 , Jens / HB9JOI +++

The title really says it all. I know you guys are really busy, but sometime there's a lull, maybe start posting some kind of change log update documents for the new and wonderful firmware you're

If you hear back from them, let us know

I'll be posting another video soon (sigh).

Received my zBitx via DHL yesterday, and powered it up today. ?Used a micro-USB to ethernet connector, and ssh'd in. To power off without wearing out the barrel connector, I purchased a 5.5x2.1mm

I sent an email to HFSignals asking when the V4 would be availible but got no answer yet.

No, thank goodness, it will be just like the V3 only with a Raspberry Pi Display 2 in it. Farhan says there will be some other facelifts also, so basically it will be like a V3 only

Will the V4 still have the PI-4 or will it be like the zBITX with a pico? Ron

First CW contact on YouTube https://youtu.be/4NDXiAAaCXQ Thank you Ashar :) Displayed log time is incorrect on this screen, but is correct when I view it via VNC. I'll open a bug report. 73