开云体育

First CW contact on YouTube https://youtu.be/4NDXiAAaCXQ Thank you Ashar :) Displayed log time is incorrect on this screen, but is correct when I view it via VNC. I'll open a bug report. 73

If you've been watching this thread for an update, like me, then look instead at this thread ( /g/BITX20/topic/fixed_cw_latency_and/112228052 ). I've applied the patch and early

I take that back Once I opened wsjt-x and hit tune from there, the tune on the zbitx panel started working Leo, AI5II [email protected]> wrote:

Tune no longer works. Leo, AI5II [email protected]> wrote:

I put it into CW mode and keyed the mic, but it just transmitted in LSB. -- Tom Sevart N2UHC -- This email has been checked for viruses by Avast antivirus software. www.avast.com

Wojtek, I'm sorry you went this way, but you can learn from your own mistakes. I'm just recommending it, because it worked for me (it's true that I'm not using it in remote mode) that the power

Some radios can send CW with a straight key if you select CW and then key the PTT line. Gerry Sherman

Hello, My sBitx v3 has killed next final MOSFET. Again, as previously ( /g/BITX20/topic/111430927 ) , only one was dead: However, this time the failure wasn't caused by overheating

Hi all, A while back at a hamfest I picked up a mystery radio being sold by a guy selling items from an SK's estate. He didn't know what it was at all, so I got a good price on it. Bringing it

Thank you Ashhar for everything you have done for this project for us all! I appreciate it! gmail.com_at_groups.io_0p8dlwo6@...> wrote:

I have a minor update to make zbitx work with wsjtx/fldigi/etc and fixed cw latency. You have to update just the raspberry zero. From a terminal window, type this: cd ~/sbitx ./update sbitx this

The kernel GPIO driver may also record the exact time of each interrupt. So if we may accept certain latency, but want to keep the original timing, it is doable. Well, it is inconvenient like playing

I believe Ashhar has already handled the interrupt recognition on key closure. The problem appeared to be "doing something as a result" - which impacts other portions of the system. That is where

Unfortunately, I haven't received my zBitx yet, but as I cen see from the schematic diagram: https://github.com/afarhan/zbitx/blob/main/schematics_zbitx.pdf , the key (J3) is connected to pins GPIO7

Dear CW enthusiasts, I saw a lot of complaints in the past weeks about bad CW performance here. is this problem now solved? https://youtu.be/WEVyuFrkBd8?si=xTYFTKVn5o9Pd4U8 DL4ZAQ Peter

Thank you Evan. Not sure when I will get going on it, but I have it now!? Oh wow.. nice a discord server.. I'll check that out too. Brad

Thank you Evan, I was on Jeff's shop website and saw that he was away and the boards were unavailable. I would prefer to wait and buy the boards from him. While waiting for his return I was going to

Hi Dean, Here is the part that Jeff Duce used in his sBitx encoder board replacement: /g/BITX20/message/116682 I suggest you try to contact Jeff, as the strain on the stock board

I see that the encoder boards are not available. Does anyone have the encoder part number. My tuning encoder just went wacky. Turn the know right and the freq goes down and then it jumped an entire

Not sure what version you are on, but the AGC is aggressive on this transceiver. Try adjusting it and see if you get desired results.