开云体育

I recommend that if you add a mouse, keyboard, or monitor, *you restart the device* , because the built-in SBC (single board computer) is simple and very stupid and will only recognize external

I'm looking at? it from a backup restore perspective. Leo, AI5Ii

With sbitx, it is worth booting from an external USB 3 because there is a speed difference. Here, the RPi4 also boots from the uSD card on the pcb, while the uSD has a speed of 30 MB/s, while the

Congratulations on solving the problem and I wish you many nice DXs. If you don't like to solder, I recommend using a power supply with current limitation. It's likely that the previous owner forgot

I follow what you are saying.? However the sdcard in the zbitx is? internal. I was hoping that a sdcard in a card reader in the USB port can be booted instead of booting from the internal

Since the rig is pre-soldered, he can't be smoking flux!

If you want a quick answer, copy the uSD card from the working system (you can do it with an SD card reader) and then swap the two cards. Due to the small size, booting from an external USB increases

Anyway, having a "shutdown" button in GUI that does power off, could be a good idea to minimize the risk of filesystem corruption... 73, Wojtek ?r., 2 kwi 2025, 08:08 u?ytkownik WZab - SP5DAA via

Just for the sake of argument, let's say I do something stupid and my zbitx will no longer boot. But I have done a SD card copy to an external usb with new UUID. How do I boot from the USB so that I

Hi Tilman, What are the properties of the /home/pi/sbitx/sbitx ? Can you execute: 'ls -l /home/pi/sbitx/sbitx' and send the result? Maybe you have done something via sudo and changed the ownership of

Deard Ashhar Yet another try. I must admit that my patience is at its limits now with the zbitx.... Anyway, tried and followed your instructions. Here the results: *pi@sbitx:~/sbitx $ git checkout

I have fixed the two issues of zbitx on CW. The new update has good keying with Iambic keyer and the cw decode noise is now gone as well. To get this update, you have to: 1. Flash the new firmware

Interesting would it be possible to get a correct instruction on how to Build a ”fresh image” for a zbitx? My radio defenitly is unusable now. Im having trouble to recomend bying one to fellow

We are close to our capacity now. We need to prep for Dayton as well. The response has been overwhelming and we may have to put brakes yet again. I guess by the end of the day we will stop taking more

Try deleting everything /var/logs. <vincedeon@...> wrote:

I was able to locate the pi user password and got in via SSH. I ran your command but it returned an error. I ran ./update and the radio is now working again. Still, no keyboard and mouse.

can you run ./build sbit to rebuild the software? pi@sbitx:/~sbitx$./build sbitx That should build it - f <vincedeon@...> wrote:

Well I'm stuck. I applied latest firmware v1.05 per page 24 of the manual, and latest software v3.051 (I think?) per page 22 of the manual. The radio then started doing all of the CW things better. I

Nothing will fully brick it. ?Even if you ruin your sd card you could always install a fresh img. ?I apt update and apt upgrade all the time. ?A few have had problems doing sudo apt full-upgrade.

I am so sorry. Too much brain fog. It is git checkout main i wrongly gave you git checkout master - f [email protected]> wrote: