开云体育

Ashhar, the ./update did not work. Wha tis the best way to reinstall zBitx SW on the RPI? Tnx, Tom KT4XN ________________________________ Sent: Friday, March 28, 2025 2:57 AM To: BITX20@groups.io

My zBitx power cord is finicky. I have to turn it slightly and squeeze it (top to bottom on top of the connector) to get it to stay on, you might want to try that. It's also shut off by itself a

I only design and write the software, I hope the sales guys answer the quality issues. I have raised it with them. groups.io <starmke1998@...> wrote:

I just wish Ashhar would chime in

I am on it gmail.com@groups.io> wrote:

I did what you suggested, Ashhar, and thanks for pointing that out to me. Unfortunately, it has not fixed the issue of the radio process locking up if I select a decode the way you did in the "Working

The zBitx has two computers, an RPi zero 2 W and a pico. The pico drives the display. By applying power to the CAT port (which is the pico power/USB port) the display operates (I assume meaning it

Spain VAT and DHL 19€+vat Total: *54.19€*

If it won’t power on attaching a monitor will not make it work

It will be interesting to see if the other processor even powers up, once you can connect ?monitor and a keyboard to it. ?If we were not a little more than 3 hours away, I would loan you cables and

Stands for “On The Go”. https://en.wikipedia.org/wiki/USB_On-The-Go?wprov=sfti1# ( https://en.wikipedia.org/wiki/USB_On-The-Go?wprov=sfti1 )

Duh, I should have figured that out. Thank you for the help. Thanks again, Robert, AG6LK

Good morning My zBitx arrive DOA.? I sent a message HFSIGNALS but got no response.? It will not power up with the connector in place.? I used my multimeter to test the power on the connector from

Hi all - While everyone has been busy with s and the z I've gone back to basics with a bitx20 inspired, all-analog SSB rig.? ?In a fit of "spontaneous construction" [(C) N2CQR] I put togeter the

OTG stands for "on the go" It's use is usually associated with USB adapters to used connect peripherals to smart phones.

Email <sales at HFSignals dot com> and ask them to be put on the list and notified when sales are open. 73 Evan AC9TU

Wondering when it would be possible to order a z bitx ? Thanks

Hi 20% in France either about 33€... Will see 1 april for me 73 Patrick

* USB On-The-Go ( https://en.wikipedia.org/wiki/USB_On-The-Go ) * -- Gyula HA3HZ

I wonder how much VAT and DHL is... 73'