Re: Careful with BNC-to-SO239 adapters
The characteristic impedance of any coaxial transmission line is highly dependent on the "ratio" of the diameter of the shielding conductor to the diameter of the inner conductor.
Since the outer
By
Smeden
·
#115308
·
|
Re: I half-broke transmit somehow
I made a backup a few weeks ago. I could try to boot off of it to see if that helps.
--
ww6x
By
ww6x
·
#115306
·
|
Re: I half-broke transmit somehow
Hi ww6x,
It is possible that the microSD card is corrupted. ?You could ask for another to be sent from HFSignals, or download a copy of the firmware from the group file section.
To verify that the
By
Evan Hand
·
#115305
·
|
Re: I half-broke transmit somehow
Honestly, I have no idea what this means. "Build" implies compilation and installation of software, but none of that has occurred since the issue appeared. If you are referring to
By
ww6x
·
#115304
·
|
Re: Shipping date zbitx
As soon as the final version of the pcb arrives.
[email protected]> wrote:
By
Ashhar Farhan
·
#115303
·
|
Re: I half-broke transmit somehow
Sent: Wednesday, January 22, 2025 10:50 AM
To: [email protected]
Subject: Re: [BITX20] I half-broke transmit somehow
The RPi controls the radio. Sometimes we are impatient and do not wait for
By
Jens/HB9JOI
·
#115302
·
|
Re: I half-broke transmit somehow
You didn't build it, the computer did, and to make it work, you first need to load the Debian 12 OS, which you can't see on the screen, but the operating system hasn't been fully built yet. You can't
By
HA3HZ
·
#115301
·
|
Re: Shipping date zbitx
Excellent news.? I'm hoping that everything falls in place.
Thank you for the update.
Doug, KI6DS
By
Doug Hendricks
·
#115300
·
|
Re: I half-broke transmit somehow
A reboot does not fix the problem, though. Also, I didn't build anything between then and now.
My first urge is to swap to a backup SD card, but we are having a Santa Ana here and the humidity here
By
ww6x
·
#115299
·
|
Re: Shipping date zbitx
I don't see the 64 bit listed on ur site. Was going to order a v3 but think I'll wait
By
Doug Backer
·
#115298
·
|
Re: sBITX 64Bit Pi Image Available
#sBitx
Thanks for this! Best quick reference doc out there!
By
Charles Guerin
·
#115297
·
|
Re: Using PI-5 with Sbitx-V3
Andi,
Joining Discord for the first time is not easy, but it is not impossible. I have to say that I tried several times before I succeeded.
At first I didn't understand what the tasks were asking me,
By
HA3HZ
·
#115296
·
|
Re: Using PI-5 with Sbitx-V3
Hi Andi,
I'm also not on discord. But there is nothing to show apart of the swapped ethernet / usb and the new display cable that needs to be used. I sent some pics here in the list more than a year
By
Rafael Diniz
·
#115295
·
|
Re: I half-broke transmit somehow
The RPi controls the radio. Sometimes we are impatient and do not wait for Debian to build, so something does not work.
It happens that we click on an icon twice, which the system doesn't particularly
By
HA3HZ
·
#115294
·
|
Re: Ubitx version 6 encoder
Hello,
Tuning was one of the reason I have created my version of the firmware (working with original display - not NEXTION).
You can try it from:
https://github.com/tomekdm/ubitxv6-09_sp7etd
All
By
tomekdm sp7etd
·
#115293
·
|
Re: Careful with BNC-to-SO239 adapters
Rafael,
I have found several over the years where the center pin was not wide enough to make a proper connection. This is regards to BNC connectors and their adapters.giving alot of intermittant
By
david todd
·
#115292
·
|
Re: Shipping date zbitx
Any chance to see a demo unit on a video.? ?
By
David T-- VE3TOS
·
#115291
·
|
Re: Shipping date zbitx
Doug and peeps,
There has been inordinate delay in some components (40 MHZ crystals for
one) arriving at assembly. We hope the smd pick and place will happen
before 1st feb.
The inductors, et al are
By
Ashhar Farhan
·
#115290
·
|
Shipping date zbitx
Farhan can you give us a date when shipping of the zbitx will start?? I have my 18650 batteries fully charged and ready to go.
Doug, KI6DS
By
Doug Hendricks
·
#115289
·
|
Re: I half-broke transmit somehow
It does, but I didn't open the radio. Something inside would have had to spontaneously fry. I do know that transmit often uses one side of the stereo sound pair of the sound system, so some setting
By
ww6x
·
#115288
·
|