开云体育

Hello don in austin... My name is Alan w7aln..on the southern outback of the oregon coast... i am fixing to assemble a pi4 into a system like you have just got working... was wondering if i might

hi..... First time poster, ...current user of Ubitx-v6. I continue to use my Ubitx-V6, it is working very well. I am thinking of buying your Sbitx-V3 board kit. 1. I have a PI-5: 1. ?I

Hi Dave, These are the one's recommended by Farhan, https://www.digikey.com/en/products/detail/bourns-inc/CDSOD323-T08SC/3781955 Joel N6ALT

I suspect the increase in power consumption is closely related to the increased pixel count of the new panel. Thanks for the info Doug, Ken, N2VIP

------------------------------------ looks like at least 614ma at boot and 542ma at idle ( https://www.tomshardware.com/raspberry-pi/raspberry-pi-touch-display-2-review-a-touch-of-class

My comment was that since people were running WSJT-X on the original lower-resolution display, I have to imagine it would run on the new higher-resolution display. Your comment explains how to do

What about a |split| display and controls like the TS-480 or IC-7100? This would facilitate placing the xcvr near the antenna and controlling the rig from inside.

Ken To run WSJT-X on the sBITX display you need to use JJ's Toolbox screen resizer which gives you a larger virtual screen that the sBITX display scrolls around in. This works pretty well as you don't

No, this is the best info available: https://datasheets.raspberrypi.com/display/touch-display-2-product-brief.pdf https://www.raspberrypi.com/products/touch-display-2/ Ken

The qrp arci board is not specific to zbitx. You can even make an I/Q vhf sdr out of it. wrote:

Thank you for the update Farhan. I presume that some of those who were distributed the board during QRP ARCI would have built it and there should be some feedback coming in. 73 [email protected]>

Any idea what the current draw is? [email protected]> wrote:

Jon, This is very early to speculate anything. We are only exploring the configuration, form factor, right now. There certainly seems to be demand enough for this. wrote:

I hope the touchscreen is better too. It seems an interesting upgrade! - Rafael

Thank you very much Farhan, for the prompt response. Hope you will be able to display the new build of zBITX at LARC-7. Some from our region are looking forward to it. 73 Jon,

Hi Joel, What is the part number of the TVS diodes you installed. Many thanks, Dave ZL1DMM

Hi Farhan, Would we still see the use of a RPi0-2W in the development ? Looking forward to seeing some great launch this December from you. Charudatt - VU2UPX [email protected]> wrote:

Evan and others who may be following. The TP1 and TP2 I mentioned below was a typo, they were TP20 and TP21. I did the same this morning. With volume control fully clockwise. Nice loud hum at Pin 3.

I am trying to see how we can fit the sbitx into KH1 form factor. The display on the zbitx was too small and almost dysfunctional. I am looking for a larger display that doesnt consume oodles of

Any idea if zBITX kits have started coming? Has someone already built one? 73 Jon, VU2JO