开云体育

Thank you very much for your numerous answers! support has contacted me and wanted a video of the error. So I reassembled the device, connected everything and connected my dipole. I started the

During covid, I started a project to make an antenna analyzer, but never got the random eBay STL-SDR to work. Seems like I could use my spanking-new sBitx to take the data instead, and much more

It's OK, I've had the radio for a week and version 4.12 was downloaded yesterday. I believe that the development will progress. ?The radio is great, I'm satisfied. I was pleasantly surprised. Thanks

Hi Andy, Before doing anything, check if there is 12V in TX in the final stage. As you said the power meter twitches then power transistors may be OK. worth checking. Raj, vu2zap

It seems that the error message cannot be resolved. My experience is that the automatic RX Filter works well, but care must be taken to use it correctly. Reducing the BW of the receiver and the auto

Stan, When the sbitx application is logged in, you will see the inscription which version you are using. This topic was last written in January, and many changes have taken place since then. -- Gyula

I would at first try to measure bias current.. if there is no current the transistors are toast. if it is under warranty then contact the seller. I have no idea if they will then send you a

Thank you for your reply. I understand. But if I press WIPE I delete everything and if the SENT and RECV fields are not filled in I will not log next time. How to make those fields remain filled?

Of course you tried transmitting in another mode like CW. To make sure it's not a FT 8 issue Patrick

Don't throw the radio just because you have to hit the swipe button! The calllsign field is also used to fill in the cw macros with your call sign. There is ample need to send cw macros even after you

Hello, I bought a SBITX for an outdoor event. I was attracted by the possibility of direct logging to the radio. I only work CW. FT8 doesn't interest me. After logging in, the call field has to be

Thanks JJ, I’ll do it in the morning. Joel N6ALT

I had some other projects and setbacks so I didn't get the v4.1 Pi image ready yet. It is currently in the testing phase. You can grab the BTS image at

FM can be added in the software so there is no need to upgrade the board. The 64 bit development team added an experimental S-Meter to the software. You can see our work at https://github.c

Hi Nigel,? There are a few U.K. stations with the sBitx, including myself.? Also there is a Discord group, I tried to send a link but think it failed to send.? Myself personally, I like the idea as

Hi I have joined the group having seen recent YouTube videos about the sBitx. I am drawn towards purchasing this because what attracts me to the design is the additional functionality provided by the

When you finally put it back together again, you really might want to switch to aluminum nitride insulators.

Does anyone have a solution for the apparent voltage drop on the DE 5-volt power rail?? Is it better to move the regulator or run a larger wire?? My first thought is to move the buck converter

I would definitely contact HFSignals. My V3, bought complete at Dayton this year, failed on the second day of use with no power out. They shipped me a replacement board to swap in and I sent the

Hi Andy, You should check with HFSignals as there is a warranty for fully assembled kits. ?At a minimum I would expect a pair of replacement MOSFETs. I would remove the two IRF510s and check with a