开云体育

Yes, you have to burn it to a new sd card, as the github description ( https://github.com/drexjj/sbitx/releases/tag/sBitx-3025-64b-Prod ) says. -- Gyula HA3HZ

Sorry of the newbie question. I know enough about Linux to be "dangerous" . With the new release can I do an in-place upgrade or do I need to burn a new SD card?

Thanks for the feedback. I have sent an email to HF Signal via their sales email address. We'll see what they suggest as a course of action Joe N7QPP

Joe: The power output of mine was OK for about 20 minutes, then dropped to zero. Repositioning the radio on its back suddenly restored a few watts of power out, suggesting a bad solder connection or

This was not a kit unit. But a unit purchased assembled at Hamvention. Joe N7QPP Sent: Monday, June 10, 2024 2:16 AM To: [email protected] Subject: Re: [BITX20] FT8 Power Pou You must do power

You must do power calibration. Instruction on sbitx.net. Bye Carlo

Hey Gang.. Because this release was being packaged up as I was still finishing a few things, There is 'minor' update waiting in the repo for the FreeDV_PTT application. One thing that will come along

Not at this time. I will work on this in the future. -JJ

Can I upgrade with a direct order?

P.S. For those of you running DE hardware, I've also included the 3.01 sound file in the download folder and a script to "downgrade" and recompile the sBitx app. To run this, open terminal and

I published a new, preconfigured, Raspberry Pi image for the sBitx this evening. This is the production version, code name, "Field

On 20 Meter FT8 I am only getting 7 watts output. Seem low to me. Yes the drive is at 100. I am using a PI4 with 8GB and running the 64 bit version. The antenna is a resonant 20 meter vertical. Any

The Kits and Parts HYCAS IF amp has been installed into my partly torn apart Daylight Again and I am impressed! Per the information provide by John, KU4AF, on the amp matching of both the detector and

Don’t want to pile on but I would really like the feet too. I don’t have access to a 3D printer. I will gladly pay for them and postage. --Tom WW8LA

Sure, no problem. I will let you know when they ship. Howard

My board has a bad and resistor going to the AF Amp. I am not at home to check the details but see </g/BITX20/topic/105501603#msg110645> You can check the voltage at the lm380 to see

If you want to know more, check the LM380 IC datasheet ( https://www.ti.com/lit/gpn/LM380 ). The speaker is 8 Ohm, the maximum output power can be 2.5W. Pay attention to the supply voltage, because

Do you have the IF Gain turned up? -- Hank W6IR

James, Increase IF gain if it is low. Raj

Those are exactly what I am looking for lmk how much if you have PayPal send me a invoice to Kcomqg@...