开云体育

I need someone to print me a set of feet that will allow the radio to tilt back or a stand anything but the stock feet

The request was for info for the discord server that was mentioned in #111436. I was assuming it might be a new sbitx oreinted one. Thanks to those that replied with links to JJ's file. -- Hank W6IR

John, that sure does and I appreciate the information you have provided. I made the changes to the HYCAS input as you suggested. I was thinking that the tuned circuit does not need to be there

Barry, I've done similar circuits, interfacing a crystal filter to a JFET amp, but not the Daylight specifically. My suggestion was based on that experience plus looking at the Daylight schematic.

For some strange reason the updater in 2.3 is not working for me. Any suggestions? Is there a command line script i could use? Joe N7QPP

I was struggling with a GPS dongle and getting NTP to sync with gps. I made sure that PPS was installed and working and still not getting anywhere after reading all the GREAT info here in the

Try to complete your sentence so we can know what you need. -- Hank W6IR

I am looking for someone to print me a different type of feet or stand for my sbitx lmk who can

John, great information! I was going to keep the input circuit of the IF amp but change the impedance to match 500 ohm instead of the 50 ohm. The output transformer of the IF amp is 50 ohm. Here I was

I used an SB40 with my Yaesu for a while. When i got a heil, i gave it to my son to use on his ubitx. It was a bit low, it is a dynamic mic after all. In his case, i wound up modifying the mic

Sorry should have stated before i do not have the USB version but the one with the 2 stereo plug.

The USB Headset app in Toolbox should work as it has adjustments for mic gain in the app. -JJ

Hey Barry, The detector input impedance at C19 is ?just R8, a 1k resistor. The hybrid cascode amp input circuit is very similar to the detector. You can make its impedance the same by removing L1, C2

Hi Alan, no I do not have a revised diagram.? My plan is to add the IF amp between the crystal filter output and the input to the detector at C19. The HYCAS IF amp input and output impedances are 50

For some reason the update button is not working for me. Can you give me the command line to update manually Joe N7QPP Sent: Thursday, June 6, 2024 10:27 PM To: [email protected] Subject: Re:

I have not tried these with a Bitx rig, but they work great with both my Icom 7300 and 7100 using a suitable cable adapter to match the rig connection and a PTT connection for a foot

Has anyone have any experience using this headset/mic combination? How did you setup the mic/mic gain? Joe N7QPP

there is a bridge on the bottom side of tft to short circuit the small 7803 if we do not want to use 5Vcc but 3.3Vcc, but internal IC seems to like 3.3V , at least the ones on my TFT. It seems the

Sometimes, there is a resistor at the back of the display that must be removed or put in (I don't remember). - f [email protected]> wrote:

Here are the two 100x100mm PCBs