开云体育

I'm trying to use wsjt-x and js8call from latest 64 image. I followed the settings from sbitx.net website to setup the software. Both exhibit the same behaviour: ok in rx, no power output in tx. The

It also points to the GIT where the details about the hat are. basically its for the person that can literally cook their own hardware from the ground up.? By "cook" I mean assemble by copying the

I still don't see any more of this than the digital part of sBitx. The information is too vague. I'll wait for more data to appear on it. -- Gyula HA3HZ

The sBITX HAT is the same stuff (Si5351A LO and WM8731 audio codec) that is on the board that the Raspberry Pi plugs into in the original sBITX, just in a more compact form. It was designed as part

Also check this thread - /g/BITX20/message/111381

addendum to my previous message: According to my knowledge, the drawing described as sBitxHat corresponds to the digital part of sBitx, the difference is that the experimental amateur can add his own

If you are waiting for a response from dx stations, then make a well-functioning antenna (without a tuner) and enjoy the 20 Watt output power. At the same time, experience when there is a good spread

Hi Nick, It seems to me that your information about sBitx is a little lacking. In the title, you write about sBitx Hat, until then about sBitx. There are a few things I can say about sBitx. The RPi 4B

Because there is some confusion as to which schematic applies, why not use an ohmmeter to verify which pin is which? The five volt regulator (7805) on the Raduino board connects directly to the Gnd

The schematic showing the wiring of the second nano has some issues. ?The pin #’s should be the same on both nanos, but they are not. ?Also, not sure about the black and red wires that connect to

Hello - I'm new to the list and to most things BITX. I have the sBITX hat given out at FDIM and am interested in dipping my toe into the water and seeing what happens.? Right now I'm trying to

Thank You JJ! 73, Robert

Sorry about the outdated link. The screen brightness control is now part of sBITX Toolbox which is located at https://github.com/drexjj/sBITX-toolbox 73, JJ

JJ: I'm one of those ignorant guys who would like to simply decrease the brightness of my screen.? Sad to say, the link you provided is dead.? Regards, John W9NET

Gyula, Soory that I posted this question on this posting. I just saw a few other people discussing the ways to control the temperature, a ways back in the posting so I thought I would ask instead of

Nobody will notice the difference between 25 watts and 50 watts (half an S unit). To make a difference, you will need a 300 watts amp (2 S units). - f gmail.com@groups.io> wrote:

Here is the picture and info of the mic I use to replace the one in the current mic ? High gain mic Joe VE1BWV ae7yd.org@groups.io> wrote:

Joe, can you post a link to the condenser microphone you are using? Thanks and 73, Yvon

Thanks for that. EXACTLY answered my question. Looks like one of these is definitely in my future. Is there documentation on the macros? Looks like a lot of stuff there. 73, Jerry ---- Extra Ham

See https://www.sbitx.net/index.php/2023/05/05/updating-the-sbitx-software-from-github/ 73, JJ Visit my repo at https://github.com/drexjj for sBitx tools, applications, and software.