开云体育

On my problem with the encoder board, I plan on using some couplers to extend the coupler shafts. I will post if that works or not. This is the enclosure that I'm using: Project Box IP65 Waterproof

But what do you mean by "stock image" Can you explain your last question?

Raj wins!? That would be the Royal Flush.? I guess I have a straight flush. 73 Evan AC9TU

Hi Gerry, I have 2 v4, 1 v5, 3 v6 uBiTx,? An antunio, and 2 sbitx.? I think that would be a royal flush ;-) I have been a customer since 2018, and after being relicensed, I received my first HF

Not yet! Bitx40, uBitx 3,4,5,6 AND Sbiitx and you have a flush!

Oh ok. Hopefully these folks can assist. I do not have familiarity with building the sBitx from scratch. /g/BITX20/search?p=created%2C0%2C%2C1%2C2%2C0%2C0&q=homebrew

Hi JJ, Thanks I will be making the hardware myself. I am just trying to get the digital part to work. A raspberry Pi, a screen, an audio codec from Mikroe and Si5351 Hmm, I do not understand your

I have 2 sBITs, 2 uBIT6s, and an Antuino.? That's 5 items from HFS.? Is that an HFS flush hand? Gerry Sherman Sent by the Windows 11 Thunderbird

Linux does support multi-arch since always. There is no problem in running 32 bits apps on 64 bits systems. 73, Rafael

It Hertz worse at 79…… Be the REASON someone smiles today. Dave K8WPE

Not necessarily. The values in *hw_settings_v3.ini* are conservative as to not blow the finals. You can rename it to *hw_settings.ini* From the Wiki.. * Transmit power calibration * Discussion of

What hardware are you using? Is it a kit or preassembled version? Are you using the stock image or 64bit image? -JJ

at 67 when I cycle it hertz. Raj

"do it with Frequency and until it Hertz" That was the funniest thing I've read in a long time. Keep that sense of humor! Max KG4PID

JJ That’s great, thank you. I wish I had the motivation to learn to program like that. Just out of curiosity, what language is your version programmed in? Robert, AG6LK

Hi. This is the error I get from starting sBitx from cmd : sbitx v3.02 i2cbb.c:writing address failed at 8 sbitx: simple.c:649: snd_mixer_selem_has_capture_switch: Assertion `elem'

Thanks for the links! Do I need to set any power configs for a factory V3? I don't want to smoke anything if I don't have to.

https://drive.google.com/file/d/1psYyo2VS46Loao0PgRS0I7J7o0gKKVvF/view?usp=sharing ( https://drive.google.com/file/d/1psYyo2VS46Loao0PgRS0I7J7o0gKKVvF/view?usp=sharing ) The upgrade to v3 by using

Is there a complete Raspberry Pi image for the sBitx V3? Is there anything I need to be aware of before imaging this radio back to factory original settings? I’m having an issue with very low

I installed GridTracker tonight on my 64bit build without issues. Get it from here https://drive.google.com/file/d/1t3y_8wcGBPgRkDrEZ5nXZ1yqgYfIMEt-/view?usp=sharing then extract it to a folder. Run