开云体育

Thank you Jeff!! I will try these out!! yes i have recently installed toolbox. Cheers Divakar ________________________________ Sent: Thursday, March 28, 2024 4:43 AM To: BITX20@groups.io

On the sBitX screen by default it runs as an app, not in the browser. Also, depending on where you click, it might need a double click...and then wait a few seconds.

Hi, I received the sBitx today. Startup boots into the pi i os system. I click on the application and the browser does not open. What should I do? 73, Carl Get Outlook for

*I'm not a programmer, I wrote this so can someone correct the

For question number one.? If your time is right to the minute but you are stuck in the wrong time zone. From the Linux prompt: cd /home/pi/sBITX-toolbox/scripts ./sbitx_fix.sh And then answer y to

You'd want to double check the locations of the holes and overall dimensions, but it looks like this one might do the

Thanks Mark. I did some searching and found Digikey has similar, 2watt, 8 ohm 70mm x 30 mm for around $5. PN 668-AS07008MC-R-ND eBay has them like you said, but shipping from china and the long

Thank you for assisting, Gyula!

Thanks much

Great Job Petr, thank you. I found your manual very helpful? but no schematics, where did you find the schematics? I followed Fahran's link and there find only the software.

Here it is: https://a.co/d/aXDiHEA currently maked as not available. But remember seeing many many on AliExpress and maybe some frome other Amazon sellers too 73 mark -- AJ6CU/7 KD8CEC 2.0, Nextion

Ioan, Simply download the .zip from the drexjj/sbitx 64-bit site. The TZ fix is already built in here. The currently available 64-bit sbitx_gtk.c includes additional cw macro fixes. After unpacking,

Hello N4GW, There is no way to return to a previous setting with the stock software.? The other characteristic is that it always starts with a "safe" value for the calibration, NOT the last saved

When measuring the inductance of your coil with the nanoVNA, do so across a range of frequencies near 45mhz, the frequency of use. I'd suggest measuring inductance across 35 to 55 mhz.

Gerard, It would be wise to check the inductance of your torroid using your nanoVNA. Could well be that there is enough capacitance between windings to give poor results. Surface mount inductors

Pleased with the radio.? Easy to assemble and sounds really great. https://youtu.be/pjSJH9uNBUg?si=g1A8Aovqe5LGmfKD Question:? I noticed I was about 60 hz off.? Went into the menu and Freq

THANKS it worked ,my only problem remained the clock at the application I Please as I do to adjust the time I entered the file sbitx_gtk.c I made the changes to lines 2300 in sbitx_gtk,c is the

Thanks for the feedback Jerry Interactive Python Console ... zC = 1 / (1j * 2 * 3.1416 * 45e6 * 16.22e-12) ... zP = zC * (333.3-235.7j) / (zC + (333.3-235.7j)) ... print(zL + zP) ...

Divakar, The solution lies in the details. There is a solution for this topic, but it is not highlighted. Therefore, it is only solved in the 64-bit version. see here. Message #110023. The output

Gerard, You have your hands full there! We learn a lot just jumping in and trying stuff. As you know this hobby is a bottomless pit, there is always more to learn. Complex impedance is one of the