开云体育

Congratulations! Did you do Manhattan construction on the boards? 73 John N4HNO

Gyula, I have monitored both my DE and V3 sbitx and found that a process builds up and, after a few minutes, will peak one of the processors to 100% and then reset and starts building again.? As far

Evan, thanks for the suggestion. Until the last few days, I used only the basic device. Due to the complex callsigns I was forced to use external screen and jtdx. I haven't had a similar message so

Gyula, Try running htop in a terminal window to see if the Raspberry Pi is hitting its processing limits.? I have found that an external HDMI monitor adds significant load onto the RPi4.? This was

Paul, interesting what you say. When I started using the device in November, I started tidying up the table so that there were no wires crossing each other. There should be no ground loop, and at the

I have had this error, my suspicion is that it might be rf feedback disrupting the software, it clears if I stop and restart the program especially if it has been running for sometime. Sometimes it

Ok, I don’t have the tray icon hence the comment

the error message cannot be read well. -- Gyula HA3HZ

Error in Sound Input I got the above error message while using sbitx with an external hdmi monitor and the jtdx program. The built-in RPi4 has 4GB of memory. I've been using the device in this

Paul, you don't have two running because one is the tray icon and the other is the running program. -- Gyula HA3HZ

Brilliant, just noticed on your screen in the video that it looks like you have two instances of the sbitx application running as shown on the top menu bar. This can cause some strange issues so, may

Dean, NICE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 73 David ac9xh

Pricing page... https://kitsandparts.com/toroids.php [email protected]> wrote: -- Paul Mateer, AA9GG Elan Engineering Corp. www.elanengr.com

25 pieces for $7.00 from DIZ... https://toroids.info/FT37-43.php -- Paul Mateer, AA9GG Elan Engineering Corp. www.elanengr.com

Hi all.... Quick progress report. Happy to report my first phone contacts were made today. I only have a low pass filter for 40 m. so far so only one band. The video is here (

Steve you’re too kind to a guy who feels like a dumbass. I still have no idea why these connectors didn’t fit. Looking forward to making contacts! Thanks again Tony

Farhan: I agree. If the only tool you have is a hammer, every problem looks like a nail. If you can, it's always nice to add a new tool to the belt. Jack, W8TEE

Tony - that's great news. WooT !! Your willingness to work through the issue paid off. So it's Tony For The Win!! 73; Steve, N3SB

Barry, They are simpler fix for you. But if we roll in this interesting change, then, all the hundreds of radios can have better debouncing without touching their soldering irons. We are homebrewing