开云体育

Andy, You are talking about a hard to get audio transformer! Raj

On Wed, Jan 10, 2024 at 08:13 AM, Rafael Diniz wrote: I believe the problem is that the sbitx_sound.c code uses the generic device name 'hw:0,0' assuming that it is the sound card for the radio data

Just upgraded to v3.02 - log DB (sbitx.db) no longer updated with new contacts.? How is the log managed now? -- Mike WB5LLI

Could this be fixed with a 9T:2T transformer between C63 and the mixer pad, and rebiasing Q6 for a gain of 2-3? And/or, could someone flesh out the emitter follower and specify which parts from the

@JJ-W9JES that did the trick, thank you!

JJ, Do you think you could make a video about it? - f

With all this talk about pull requests and stable versions and so on, I want to offer the following. I have my original v2 card that came with my radio, then I made a spare of that and now a spare of

Thanks Peter. I am glad you are enjoying it. I also forgot to update the screen size for sBITX-Scanner from the Windows version. I fixed it on the repo. if you have it installed already, then go to

Thanks JJ, I really like your screen brightness control app. -- Pete VK3PYE

When you see the error, type *git stash* then rerun the update

I tried to run an update by running ./update and ran into this error: Sun 21 Jan 2024 03:25:06 PM MST Updating 7abd77d..a60313c error: Your local changes to the following files would be overwritten

Leg strength should not be an issue if printed in the correct orientation. If more strength needed, use a carbon fiber filament. 73 Roy Sent from [Proton Mail](https://proton.me/mail/home) for iOS

> > On Sat, Jan 20, 2024 at 09:31 PM, Ashhar Farhan wrote: > >> Ok, here are a few comments: > > I will offer what I think is constructive feedback, and hope it will be > accepted as such. > > >>

I think the H concept is good, but I'll have to see an image when one becomes available (no rush at all). I haven't seen the Elecraft setup so I don't know what it looks like ( I know, how could I

Hello. I created another app based on a request for the sBitx platform. https://github.com/drexjj/sBITX-Scanner sBITX Frequency Scanner is an application for scanning radio frequencies with the

Dave, Thanks for the recommendations! I had actually printed a longer leg for my kx2 several years back. It seemed strong enough.? I was actually thinking of two legs, one on either side that had a

Ashar, Clearing the PRs is good. was watching Mark Erbaugh's github as he seemed to be workng his way through a lot of the siignal processing code and cleaning things up a bit. But, he never made

I don't know if this helps, but: * Link to 3D printed stand design for sbitx ( https://www.printables.com/model/496717-sbitx-v2-stand/files ) * Link to my earlier thread on sbitx mechanicals and

It was Mark's idea first -- "I also want to add a brace -- like what Elecraft provides for their KX2/KX3 -- so the sBitx can tilt back slightly." There are a few ideas I've seen on this group too.?

Vhf version of sbitx? ( /g/BITX20/topic/96689550#99697 ) has some interesting thoughts from Farhan and others on this group. Farhan Describes his New 2 Meter SSB Transceiver (Video)