Will do. I will give it a good testing tomorrow.
?Thanks Philip G7JUR
|
Oh, excellent! I won't bother with the hex then :) Let me know if you run into any hiccups on the? /g/BITX20/topic/ubitx_v6_screen_speed_mod/69375908?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,20,69375908?thread Reed
|
Hi Reed.
Just managed? to compile your firmware and install it.
Great that's one hell of a lot faster. Very happy, thanks
|
|
|
@Philip - I'll try and get you a hex file tonight. I don't have one on hand.
@Armando - pdq_gfx_update is what I'd recommend, since several people have reported success using it. one_stop_settings apparently has some gremlins in it that I won't be able to sort out until I actually finish my build, and fix_morse only fixes the "F" in the morse playback without modifying the screen at all.
Reed
|
Reed, which branch are you recommending as most stable and fast? pdq_gfx , one_stop or fix_morse? A
Philip,
Did you update to the pdq_gfx_update branch, or something else?
Reed
|
I cannot work out how to compile it. That is why I was asking for compiled HEX file.
Philip
|
@MadRadioModder,
I mean, sure, if you buy a faster processor you'll get better performance. That's not really the point, though. My branch gets reasonable screen refresh speeds at zero additional cost and with zero hardware mods.
Reed
|
Yeah upgrade to a Teensy 4.0 with W0EB¡¯s daughter board and watch how fast it goes¡? The display will be the rate limiting step. ? ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of Curt via Groups.Io
Sent: Tuesday, January 7, 2020 3:38 PM
To: [email protected]
Subject: Re: [BITX20] Slow V6 screen ? Interesting reaction.? I watched Ashar's video introducing v6 and it seemed fast enough to change bands etc.? usually its the tuning knob and volume control that get all the action.? I didn't see a 'use' for a fancy display but the work that went into v6 looks rather nice.?
enjoy the version you have!? I am staying course with my v4.?
73 Curt -- ¡_. _._
|
Philip,
Did you update to the pdq_gfx_update branch, or something else?
Reed
|
Re: Help with troubleshooting Bitx40 - no transmit.
#bitx40help
Replace Q13...It has most likely shorted internally...It is the predriver to the transmitter stage...
|
Yes it does now I have updated it
|
Interesting reaction.? I watched Ashar's video introducing v6 and it seemed fast enough to change bands etc.? usually its the tuning knob and volume control that get all the action.? I didn't see a 'use' for a fancy display but the work that went into v6 looks rather nice.?
enjoy the version you have!? I am staying course with my v4.?
73 Curt
|
Full kIt arrived the day before New Years. Reflecting on packing it was OK...nothing was scratched,?
dented or flopping around for the DHL shipment time of 9 days. Assembled last Saturday.? Played
around Sunday and Monday after setting the FREQ setting and the BFO setting. Quite an engineering,
feat and I suppose programming endeavor by the creator.?
However, this is my first ham rig having a touch screen. And I simply DO NOT LIKE touchscreen.
The radio is a little box'ier? than intentioned so not interesting in it for my go-kit. I'm keeping with my
knob/display radios, and? KD1JV Tribander for the field.?
This one is up for sale...... As new...complete assembled already with everything that comes with it.
It has a serial number of #167 on box, and will be shipped USPS priority mail upon full payment
via USPS MO or cleared check -? $190 shipped.
72,
Mark
|
No pre-compiled binary, but I do have a branch (and outstanding pull request) for a much faster version: /g/BITX20/topic/ubitx_v6_screen_speed_mod/69375908?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,20,69375908Reed
|
does yours allow selection of 17 m band? if not maybe a newer
faster one might have that fix in it as well
On 2020-01-07 3:26 p.m., Philip wrote:
toggle quoted message
Show quoted text
Just built my uBitx v6, I cannot believe how slow the display is.
Could someone post a compiled HEX of the faster firmware.
Philip G7JUR
|
Just built my uBitx v6, I cannot believe how slow the display is.
Could someone post a compiled HEX of the faster firmware.
Philip G7JUR
|
Mine turned up with damage. The volume pot broken off the the board, marks on the touch screen, and damage to the corners of the case. Also chipped paint work.
Philip G7JUR
|
And I, for one, do not want the group to fracture into subgroups at
all. I find all emails about the uBitx and Bitx40 relevant, not only
to their respective radios but across versions. I do not want to hunt
around in subgroups for the information I want to find. - Rich WB2GXM
toggle quoted message
Show quoted text
On 1/7/20, Curt M. <WU3URADIO@...> wrote: One group that I belong to has sub groups in it so you still log into the
same group yet there are sub categories. ?I do see where this would be a
slight issue when a problem is across all versions but it might clean up
things a litte. ?Just sayin....
Curt M.
|
Re: [BITxV6] BRICKED recovery help needed
Hi Andy,
12V @ 6A?is good, but doesn't actually indicate how "fast" your power supply is. Power supplies have ramp up times and response times that determine how "fast" they are.
I agree that not having an easy "reset" button is a potential issue. You could solder such a button on, and cut a hole in your case for a momentary push button, but for your target audience that may not be ideal?
I haven't put very much effort investigating the power sequencing yet, but it may be that there's a simple mod (either in software or hardware) that reliably prevents the "blank screen syndrome" in all cases. Definitely should be on the "to-do" list, though.
Reed
|
MadRadioModder
Mark WO7T