Re: sbitxv2 is available now
Hello Paul,
Right now we don't have the option of buying just the board and the enclosure. The enclosure comes with the display.
Maybe at a later point in time we may consider this option of just the board and the enclosure, but right now we aren't offering?it.
Hope it helps.
Thomas
On Thu, 13 Apr 2023, 19:05 Paul k9mv, < k9mv@...> wrote: I'd like the option to buy just the board and the case.? I have the RPi and the display.?
-Paul? K9MV
--
Support@...
|
Re: Understanding new sBitx software stack
Btw, Ashhar, you said you had some hiccups in 64 bits. I got no hiccup yet. If you remember what it was, let me know.
Rafael
toggle quoted message
Show quoted text
On 4/13/23 19:46, Rafael Diniz wrote: So, I finally managed to bring up the sbitx on stock Debian 11 arm64 (aarch64). I'll carry more tests tomorrow, but so far, so good. I also tried to do the setup in a more standard compliant way, by using debian supplied fftw libraries, bringing up the alsa loop module in the proper /etc/modules and set its options in a separate /etc/modprobe.d/ file. As soon as I finish a clean setup in a debian 11 aarch64 I will share the setup files.
I also added a Makefile which can be useful for the ones in 64 bits in my fork:
Cheers!
Rafael
On 4/12/23 17:52, Rafael Diniz wrote:
perfect. tks!
On 4/12/23 14:18, Ashhar Farhan wrote:
The first loopback pair is used by fldigi, you can connect to the next one. Or just kill fldigi and use the first. Check fldigi's sound config to know how it is done.
On Wed, Apr 12, 2023, 4:31 PM Rafael Diniz <rafael@...> wrote:
??? Hi,
??? I uncommented the password line in data/default_settings.ini
??? (123), but
??? I get the same error. I ended up just commenting the lines which
??? check
??? the cookie in webserver.c and now I got it working. Yay!
??? One question - if I want to use VARA (using box86 / wine), should I
??? connected it to the alsa loopback, right? But to which alsa loopback
??? device? Where the "connections" between the alsa loopback devices and
??? the actual Wolfram wm8731 (audioinjector-pi-soundcard, hw:0,0) are
??? done?
??? Triggering ptt is easy.
??? Cheers,
??? Rafael
??? On 4/12/23 13:40, Ashhar Farhan wrote:
??? > It will be data/default_settings.ini in the git repo.
??? > - f
??? >
??? > On Wed, Apr 12, 2023, 1:36 PM Rafael Diniz
??? <rafael@...> wrote:
??? >
??? >? ? ?Hi Ashhar,
??? >
??? >? ? ?There is no such file.
??? >
??? >? ? ?Cheers,
??? >? ? ?Rafael
??? >
??? >? ? ?On 4/11/23 21:29, Ashhar Farhan wrote:
??? >? ? ?> Rafael,
??? >? ? ?> check if the passkey is correct (it will be stored in
??? >? ? ?> data/user_settings.ini).
??? >? ? ?> - f
??? >? ? ?>
??? >? ? ?> On Tue, Apr 11, 2023 at 10:34?PM Rafael Diniz
??? >? ? ?<rafael@...>
??? >? ? ?> wrote:
??? >? ? ?>
??? >? ? ?>? ? ?I can confirm the web UI does not work when accessing
??? using
??? >? ? ?the IP of
??? >? ? ?>? ? ?the sbitx in the VPN.
??? >? ? ?>
??? >? ? ?>? ? ?The login screen opens, but after typing 123 for
??? login, the UI
??? >? ? ?>? ? ?kind of
??? >? ? ?>? ? ?blinks, then it goes back to the login screen (I'm
??? using 123 as
??? >? ? ?>? ? ?password).
??? >? ? ?>
??? >? ? ?>? ? ?Same error in the console:
??? >? ? ?>
??? >? ? ?>? ? ?trying login with passkey : [123]
??? >? ? ?>? ? ?Cookie not found, closing socket
??? >? ? ?>
??? >? ? ?>? ? ?Rafael
??? >? ? ?>
??? >? ? ?>? ? ?On 4/10/23 20:25, Rafael Diniz wrote:
??? >? ? ?>? ? ?> Trying to log-in from another computer, I'm getting
??? this:
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?> trying login with passkey : [123]
??? >? ? ?>? ? ?> Cookie not found, closing socket
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?> It might be my fault, I did not investigate much
??? (and I'm on
??? >? ? ?>? ? ?arm64).
??? >? ? ?>? ? ?> Tomorrow I'll take a closer look.
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?> Rafael
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?> On 4/10/23 16:56, Ashhar Farhan wrote:
??? >? ? ?>? ? ?>> I just kept the src of mongoose there. It serves no
??? >? ? ?purpose yet.
??? >? ? ?>? ? ?>> The websocket emulates the console text commands.
??? >? ? ?>? ? ?>> Btw, you can login into it from another computer.
??? Just type
??? >? ? ?>? ? ?>> sbitx.local on the browser address bar.
??? >? ? ?>? ? ?>> I kept the web server with your work in mind. With a
??? >? ? ?little effort
??? >? ? ?>? ? ?>> and an external wifi dongle on a pole, you can
??? extend the
??? >? ? ?wifi
??? >? ? ?>? ? ?range
??? >? ? ?>? ? ?>> of this to the whole settlement.
??? >? ? ?>? ? ?>> - f
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> On Mon, Apr 10, 2023, 7:15 PM Rafael Diniz
??? >? ? ?>? ? ?<rafael@...>
??? >? ? ?>? ? ?>> wrote:
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> ??? Just to see if I got it right:
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> ??? - Now the sBitx code now has websocket and
??? webserver code
??? >? ? ?>? ? ?inside (in
??? >? ? ?>? ? ?>> ??? order to talk to the WebUI)
??? >? ? ?>? ? ?>> ??? - GTK UI is still there, and the "old"
??? interface can
??? >? ? ?still
??? >? ? ?>? ? ?be used
??? >? ? ?>? ? ?>> ??? - WebUI code is in the "web" folder
??? >? ? ?>? ? ?>> ??? - What exactly is the code at "web/src" for?
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> ??? Needless to say, Ashhar, you work is just mind
??? blowing !
??? >? ? ?>? ? ?Cheers!!
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> ??? Rafael
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >
??? >
??? >
??? >
??? >
??? >
|
Re: Understanding new sBitx software stack
So, I finally managed to bring up the sbitx on stock Debian 11 arm64 (aarch64). I'll carry more tests tomorrow, but so far, so good. I also tried to do the setup in a more standard compliant way, by using debian supplied fftw libraries, bringing up the alsa loop module in the proper /etc/modules and set its options in a separate /etc/modprobe.d/ file. As soon as I finish a clean setup in a debian 11 aarch64 I will share the setup files.
I also added a Makefile which can be useful for the ones in 64 bits in my fork:
Cheers!
Rafael
toggle quoted message
Show quoted text
On 4/12/23 17:52, Rafael Diniz wrote: perfect. tks!
On 4/12/23 14:18, Ashhar Farhan wrote:
The first loopback pair is used by fldigi, you can connect to the next one. Or just kill fldigi and use the first. Check fldigi's sound config to know how it is done.
On Wed, Apr 12, 2023, 4:31 PM Rafael Diniz <rafael@...> wrote:
??? Hi,
??? I uncommented the password line in data/default_settings.ini
??? (123), but
??? I get the same error. I ended up just commenting the lines which
??? check
??? the cookie in webserver.c and now I got it working. Yay!
??? One question - if I want to use VARA (using box86 / wine), should I
??? connected it to the alsa loopback, right? But to which alsa loopback
??? device? Where the "connections" between the alsa loopback devices and
??? the actual Wolfram wm8731 (audioinjector-pi-soundcard, hw:0,0) are
??? done?
??? Triggering ptt is easy.
??? Cheers,
??? Rafael
??? On 4/12/23 13:40, Ashhar Farhan wrote:
??? > It will be data/default_settings.ini in the git repo.
??? > - f
??? >
??? > On Wed, Apr 12, 2023, 1:36 PM Rafael Diniz
??? <rafael@...> wrote:
??? >
??? >? ? ?Hi Ashhar,
??? >
??? >? ? ?There is no such file.
??? >
??? >? ? ?Cheers,
??? >? ? ?Rafael
??? >
??? >? ? ?On 4/11/23 21:29, Ashhar Farhan wrote:
??? >? ? ?> Rafael,
??? >? ? ?> check if the passkey is correct (it will be stored in
??? >? ? ?> data/user_settings.ini).
??? >? ? ?> - f
??? >? ? ?>
??? >? ? ?> On Tue, Apr 11, 2023 at 10:34?PM Rafael Diniz
??? >? ? ?<rafael@...>
??? >? ? ?> wrote:
??? >? ? ?>
??? >? ? ?>? ? ?I can confirm the web UI does not work when accessing
??? using
??? >? ? ?the IP of
??? >? ? ?>? ? ?the sbitx in the VPN.
??? >? ? ?>
??? >? ? ?>? ? ?The login screen opens, but after typing 123 for
??? login, the UI
??? >? ? ?>? ? ?kind of
??? >? ? ?>? ? ?blinks, then it goes back to the login screen (I'm
??? using 123 as
??? >? ? ?>? ? ?password).
??? >? ? ?>
??? >? ? ?>? ? ?Same error in the console:
??? >? ? ?>
??? >? ? ?>? ? ?trying login with passkey : [123]
??? >? ? ?>? ? ?Cookie not found, closing socket
??? >? ? ?>
??? >? ? ?>? ? ?Rafael
??? >? ? ?>
??? >? ? ?>? ? ?On 4/10/23 20:25, Rafael Diniz wrote:
??? >? ? ?>? ? ?> Trying to log-in from another computer, I'm getting
??? this:
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?> trying login with passkey : [123]
??? >? ? ?>? ? ?> Cookie not found, closing socket
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?> It might be my fault, I did not investigate much
??? (and I'm on
??? >? ? ?>? ? ?arm64).
??? >? ? ?>? ? ?> Tomorrow I'll take a closer look.
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?> Rafael
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?> On 4/10/23 16:56, Ashhar Farhan wrote:
??? >? ? ?>? ? ?>> I just kept the src of mongoose there. It serves no
??? >? ? ?purpose yet.
??? >? ? ?>? ? ?>> The websocket emulates the console text commands.
??? >? ? ?>? ? ?>> Btw, you can login into it from another computer.
??? Just type
??? >? ? ?>? ? ?>> sbitx.local on the browser address bar.
??? >? ? ?>? ? ?>> I kept the web server with your work in mind. With a
??? >? ? ?little effort
??? >? ? ?>? ? ?>> and an external wifi dongle on a pole, you can
??? extend the
??? >? ? ?wifi
??? >? ? ?>? ? ?range
??? >? ? ?>? ? ?>> of this to the whole settlement.
??? >? ? ?>? ? ?>> - f
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> On Mon, Apr 10, 2023, 7:15 PM Rafael Diniz
??? >? ? ?>? ? ?<rafael@...>
??? >? ? ?>? ? ?>> wrote:
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> ??? Just to see if I got it right:
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> ??? - Now the sBitx code now has websocket and
??? webserver code
??? >? ? ?>? ? ?inside (in
??? >? ? ?>? ? ?>> ??? order to talk to the WebUI)
??? >? ? ?>? ? ?>> ??? - GTK UI is still there, and the "old"
??? interface can
??? >? ? ?still
??? >? ? ?>? ? ?be used
??? >? ? ?>? ? ?>> ??? - WebUI code is in the "web" folder
??? >? ? ?>? ? ?>> ??? - What exactly is the code at "web/src" for?
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> ??? Needless to say, Ashhar, you work is just mind
??? blowing !
??? >? ? ?>? ? ?Cheers!!
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>> ??? Rafael
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>>
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?>
??? >? ? ?>? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >? ? ?>
??? >
??? >
??? >
??? >
??? >
??? >
|
Re: New problem with sBitx: no signal, no audio
Ok, I’m now learning more about I2C. BTW my new scope has serial decode, including I2C.?
Clearly the Raspberry Pi has to establish a serial communication with the Si5351a when the sbitx process starts in order for the radio to work. Sometimes that link is established and sometimes it isn’t. I’m assuming the Raspberry Pi is the master and the 5351 is the slave. The question then is, which is at fault? Is the Raspberry Pi failing to initiate a connection properly or is the 5351 unable to acknowledge appropriately? How would one tell? Jack N6LN
|
New to the list. Been an active
radio amateur for over 60 years. Just became aware of the
sBitxV2 yesterday, so I joined the list to learn what I can.
The sBitxV2 with it's 7" screen, looks like an excellent,
reasonably priced, easy to use, portable/emergency transceiver.
Couple of questions:
Has adding the 60 meter band been addressed? (Is
it possible and/or reasonable)?
Has adding "out of the AR bands" transmit for MARS and Shares,
been addressed? (same query).
Your attention is appreciated.
Ray, W4BYG
Cleveland, TN
--
"If you want to build a strong house, I'll give you my engineer's number.
If you want to build a strong life, I'll introduce you to my carpenter."
Lebron and Heather Lackey
|
Using an external HDMI TV Monitor
I have difficulty using an old HDMI TV as a monitor with the Sbitx.? I believe that the HDMI sound is the issue.? It seems to work if I duplicate the displays.? That makes the DSI display bigger, not at a higher resolution.? If I adjust the second display to a higher resolution, the gtk screen starts on the HDMI screen, not the DSI.
So there are two issues that I do not understand:
1 - How to setup the sound system to start correctly when an HDMI monitor with sound is connected
2 - How can the base gtk screen start on the built-in DSI monitor and not the external HDMI when the HDMI has a different resolution?
73
Evan
AC9TU
?
|
Re: sbitxv2 is available now
I'd like the option to buy just the board and the case.? I have the RPi and the display.?
-Paul? K9MV
|
Re: New problem with sBitx: no signal, no audio
Jack,
I have a similar issue with my sBITX.? It is not as frequent as what you have described.? It will, on occasion, not start or will start with a wave across the band scope.? Turning off, and waiting for a minute, will, most of the time, correct the issue.? Sometimes it takes a couple of tries.?
Something in the bootup sequence does not always initialize everything correctly.? If the initialization fails, it does not detect the issue and will start with impaired operation.? I thought it had to do with the WM8731 codec.? I was not been able to track it down.? Your finding the noise on the SDA when the HDMI cable is connected may indicate that it concerns the Si5351 initialization and not the WM8731 code.
I like the new scope traces.? It is pushing me to upgrade my scope.
73
Evan
AC9TU
|
toggle quoted message
Show quoted text
On Thu, Apr 13, 2023, 1:06 PM Petr Ourednik < indians@...> wrote: Farhan,
just quick note > the "Read more & order your sBitx..." (red colored) on the Home page has typo error (yout) and the link does not work.
No complain just I realized it? this morning.
- P
|
Re: New problem with sBitx: no signal, no audio
Thanks Lawrence.?
Evan, the Si5351 breakout board has short leads and is nearly on top of where the 5351 used to be on the main board. Please see the photo. Also, the cable to the RTC board already has chokes per your previous suggestion. For the purposes of this testing the RTC unit itself is not connected.
I now have a half decent scope which is light years more useful than the cheap scope I had been using. I can now clearly see what’s on the I2C lines and store images. It’s much easier to see clearly whether there should activity or not. Same goes for the clock outputs.?
Here’s what I’ve seen tonight: the Si5351 breakout board appeared dead, or was not active, for days regardless of restarting the sBitx process or rebooting the unit or recycling power. Previously in weeks past it apparently wouldn’t start and the waterfall would run but without any signal or noise whatsoever, and there was no rf output on key down. Tonight, however, that inactivity once again became intermittent. It happened about three times but came completely back to life with a power recycle. And later on it became more stable, reliably starting up with good audio, good FT8 signals and good CW output to a dummy load. So the board is not fried. ?Why it’s intermittent is a mystery. I’ve checked all of the solder connections and they look fine but perhaps I should reheat each joint in case there’s a cold one. This is with the front panel and RTC clock removed.
Now that I have a scope that’s easier to use I can see more clearly (with better triggering circuits) when there is activity on SDA and SDL, and output on the clock outputs. See the stored traces that I uploaded. First, there’s a signal on the I2C lines even when the main power is off, and this is clearly present only when the HDMI is connected to the Raspberry Pi. Next are the traces from the SDA, SCL and CLK0 CLK1 and CLK2 lines. When the sBitx process is running but there’s no audio or waterfall noise or signal, there’s no activity—nothing—on the I2C lines and no clock output at all. I am not sure why I am having this intermittent problem but at least it’s working now. I wonder whether there is a problem with one of the pull-up resistors on the Adafruit Si5351a breakout board. I could always reinstall the pull-up resistors on the main board which are sitting there tombstoned. I also put some heat sinks on the 2N2219A’s. They were getting hotter than the IRFZ24Ns! I’ll take a closer look tomorrow.
73
Jack?
N6LN      
|
Farhan,
just quick note > the "Read more & order your sBitx..." (red colored) on the Home page has typo error (yout) and the link does not work.
No complain just I realized it? this morning.
- P
|
I am going to add a text to speech anyway. Sbitx is committed to accessiblity. The idea is to have an eyes-free radio. Eventually, the gtk gui will gve away to a text ui. - f
On Thu, Apr 13, 2023, 5:12 AM JerryP < jponko@...> wrote: Ashhar, You should add a speech to morse converter :)
--
Jerry Ponko, AC9NM
|
Ashhar, You should add a speech to morse converter :)
-- Jerry Ponko, AC9NM
|
Re: SWR Addition to V1 Board
My bad. I've been working a lot with the Raspberry Pi Pico which has ADC. I thought that the Pi must also.
--
73,
Mark, N8ME
|
Petr? The planned feature is not so2r, but being able to respond back to two contacts at once. It works like this : You call CQ and wait, two stations call you back. Now, when you transmit your exchange, you can simultaneously transmit two messages at two different tones (frequencies) in the same transmission. It is very simple implementation. The key challenge would be to be able to decode both at once. Probably, one station by ear and the other by a decoder. Someone has to crack a multichannel cw decoder... - f
On Thu, Apr 13, 2023, 1:18 AM Petr Ourednik < indians@...> wrote: Excellent dear Farhan!
I am ready to test it deeply when it will arrive here :) I am pure CW operator and using paddle at high speed. So I am offering my help with CW mode and features if you want. Specially QSK is the goal as your design is not using clicky relays, which is perfect.?
Wow, the SO2R mode would be amazing feature for us DXers and contesters so I will be proud to use it.?
It looks like your V2 is going to be really great radio! Let me know in case of any help needed.?
Thanks in advance…
- P
?
|
Re: sbitxv2 is available now
That's still not what was asked for.? The request was a board and enclosure.? The link you referenced is board, enclosure and display.
toggle quoted message
Show quoted text
-------- Original message -------- From: "D. Daniel McGlothin KB3MUN" <kb3mun@...> Date: 4/12/23 7:02 PM (GMT-05:00) Subject: Re: [BITX20] sbitxv2 is available now
see
73 de Daniel KB3MUN
On 4/12/2023 18:21, Ron wrote:
No, that seems to be a ubitx board.? The only
thing I see is the sbitx full kit, no rpi, and board as options
for the sbitx
-------- Original message --------
Date: 4/12/23 6:16 PM (GMT-05:00)
Subject: Re: [BITX20] sbitxv2 is available now
i found it on the BUY page :??
On 4/12/2023 6:13 PM, bill steffey
NY9H wrote:
if you look at the ordering page? , one of the options is to
buy the case & board,?? you fill in the raspi
right now I cannot get to the ordering page ,,,,?? I already
ordered my board & case !!!
bill
On 4/12/2023 5:45 PM, Paul k9mv
wrote:
Will HFSignals be selling the case as a
separate item?? I'd like to buy the main board and the case to
put it in.
Thanks.
-Paul? K9MV
|
Re: sbitxv2 is available now
see
73 de Daniel KB3MUN
On 4/12/2023 18:21, Ron wrote:
toggle quoted message
Show quoted text
No, that seems to be a ubitx board.? The only
thing I see is the sbitx full kit, no rpi, and board as options
for the sbitx
-------- Original message --------
Date: 4/12/23 6:16 PM (GMT-05:00)
Subject: Re: [BITX20] sbitxv2 is available now
i found it on the BUY page :??
On 4/12/2023 6:13 PM, bill steffey
NY9H wrote:
if you look at the ordering page? , one of the options is to
buy the case & board,?? you fill in the raspi
right now I cannot get to the ordering page ,,,,?? I already
ordered my board & case !!!
bill
On 4/12/2023 5:45 PM, Paul k9mv
wrote:
Will HFSignals be selling the case as a
separate item?? I'd like to buy the main board and the case to
put it in.
Thanks.
-Paul? K9MV
|
Re: sbitxv2 is available now
No, that seems to be a ubitx board.? The only thing I see is the sbitx full kit, no rpi, and board as options for the sbitx
toggle quoted message
Show quoted text
-------- Original message -------- From: bill steffey NY9H <ny9h@...> Date: 4/12/23 6:16 PM (GMT-05:00) Subject: Re: [BITX20] sbitxv2 is available now
i found it on the BUY page :??
On 4/12/2023 6:13 PM, bill steffey NY9H
wrote:
if you look at the ordering page? , one of the options is to
buy the case & board,?? you fill in the raspi
right now I cannot get to the ordering page ,,,,?? I already
ordered my board & case !!!
bill
On 4/12/2023 5:45 PM, Paul k9mv
wrote:
Will HFSignals be selling the case as a separate item?? I'd like
to buy the main board and the case to put it in.
Thanks.
-Paul? K9MV
|
Re: sbitxv2 is available now
i found it on the BUY page :??
On 4/12/2023 6:13 PM, bill steffey NY9H
wrote:
toggle quoted message
Show quoted text
if you look at the ordering page? , one of the options is to
buy the case & board,?? you fill in the raspi
right now I cannot get to the ordering page ,,,,?? I already
ordered my board & case !!!
bill
On 4/12/2023 5:45 PM, Paul k9mv
wrote:
Will HFSignals be selling the case as a separate item?? I'd like
to buy the main board and the case to put it in.
Thanks.
-Paul? K9MV
|
Re: sbitxv2 is available now
if you look at the ordering page? , one of the options is to buy
the case & board,?? you fill in the raspi
right now I cannot get to the ordering page ,,,,?? I already
ordered my board & case !!!
bill
On 4/12/2023 5:45 PM, Paul k9mv wrote:
toggle quoted message
Show quoted text
Will HFSignals be selling the case as a separate item?? I'd like
to buy the main board and the case to put it in.
Thanks.
-Paul? K9MV
|
John Terrell, N6LN
JerryP
Mark Erbaugh