开云体育

Linux does support multi-arch since always. There is no problem in running 32 bits apps on 64 bits systems. 73, Rafael

It Hertz worse at 79…… Be the REASON someone smiles today. Dave K8WPE

Not necessarily. The values in *hw_settings_v3.ini* are conservative as to not blow the finals. You can rename it to *hw_settings.ini* From the Wiki.. * Transmit power calibration * Discussion of

What hardware are you using? Is it a kit or preassembled version? Are you using the stock image or 64bit image? -JJ

at 67 when I cycle it hertz. Raj

"do it with Frequency and until it Hertz" That was the funniest thing I've read in a long time. Keep that sense of humor! Max KG4PID

JJ That’s great, thank you. I wish I had the motivation to learn to program like that. Just out of curiosity, what language is your version programmed in? Robert, AG6LK

Hi. This is the error I get from starting sBitx from cmd : sbitx v3.02 i2cbb.c:writing address failed at 8 sbitx: simple.c:649: snd_mixer_selem_has_capture_switch: Assertion `elem'

Thanks for the links! Do I need to set any power configs for a factory V3? I don't want to smoke anything if I don't have to.

https://drive.google.com/file/d/1psYyo2VS46Loao0PgRS0I7J7o0gKKVvF/view?usp=sharing ( https://drive.google.com/file/d/1psYyo2VS46Loao0PgRS0I7J7o0gKKVvF/view?usp=sharing ) The upgrade to v3 by using

Is there a complete Raspberry Pi image for the sBitx V3? Is there anything I need to be aware of before imaging this radio back to factory original settings? I’m having an issue with very low

I installed GridTracker tonight on my 64bit build without issues. Get it from here https://drive.google.com/file/d/1t3y_8wcGBPgRkDrEZ5nXZ1yqgYfIMEt-/view?usp=sharing then extract it to a folder. Run

Hello Mathis, The Nano's stock firmware will not work with a Nextion screen.? You also need to find the correct TFT file for your Nextion display or edit one from an HMI file and the Nextion

Hello, I am new in this Board. I say hello to this amazing community ! A buildet an uBitx v6 with an 2.8 Standard Screen an it works fine. Now i bought an 5 inch Nextion display and it did not

Hello all, Has anyone tried using Gridtracker with JJ’s sBitx 64-bit OS? I don’t believe that there is a 64-bit version of Gridtracker so you would have to use the 32-bit version or would it have

I don't have a V3 sBITX so this might be totally wrong. That said, the IDE connector appears to be 1x5 (5 pins) connector rather than a 2x5 (10 pins). If it were me, I'd use some wire snips to cut

H Aaron, It is a known fact.? Electrically, you can move the connector to the other side of the board.? In the supplied case, this interferes with the display as the tuning and function encoder are

There was a point in my life, right after I received my sBITX V3, when I made the declaration that the sBITX is the very best radio that I have ever used. I have probably used around 50-75 different

Yes, that is the plan when I get around to releasing it. My family and work life have been taking priority at the moment. -JJ

The foundations must be set well. See related descriptions on sbitx.net. Now I leave it to you, but I don't know when and how well your device was adjusted at the manufacturer. Mine is from the first