开云体育

Bob, I think I got it. Imported your backbrace stl into tinkercad and used the grid there to get it to the mm. Left to right is 196mm and the "middle" hole is 42mm from left. Let me know if you

Mark I meant the rounded part to face in and the flat back to contact the leg angle stop. Thanks for the catch. I'll improve the directions. Attached is a drawing of hole locations. I know what you

I have been looking at the schematics of the ubitx and sbitx units. Both appear to use the IRF510, at least in the diagrams that I found. The sbitx is advertised as 20 watts and the ubitx is

On Mon, Jan 22, 2024 at 11:50 AM, Dave, N1AI wrote: > > On Mon, Jan 22, 2024 at 02:30 PM, WB6GJE Mike wrote: > > > > > FYI, Jeff Geerling covers the use of USB and PCIe booting for Raspberry > >

Bob, That would be good if you have a chance.? Trying to place the holes once. I never seem to measure them exactly and find myself always printing, move a mm, print again, move a mm,

Sorry, I should have added the stock screen is the "official" Pi screen: https://www.raspberrypi.com/products/raspberry-pi-touch-display/

I would love to have a better display for the V2/V3, without so much wasted space around the edges.

LCD is for the sbitx v3.

That's all excellent news!? Sounds like you are having fun, and that many others are benefiting from your work. -- Regards, Dave, N1AI

Mark I just measured the distance between them. I can go back and measure them referenced to the top corners. -- 73 Bob? KD8CGH

Hi Dave,

I have an original, LCD display available for a uBitx V6 if it needed. - JJ

Bob, Perfect!? Do you have the dimensions on the location (x,y) of those screw holes? I will just make them an option on my 3d printed case and reference your work. 73 Mark -- AJ6CU/7 KD8CEC 2.0,

Hi Jeff, Which radio needs the part?? A site, V6 uBiTx, or a V5 or earlier uBiTx?? There are three different screens, one for each plus the Nextion screen for the uBiTx mods. 73 Evan AC9TU

Anyone know the model/part number for the LCD screen and driver board? Or where I can pick up another? TY!

Mike My case came with threaded inserts for M4 screws. Details like that are in the? printables link. Bob -- 73 Bob? KD8CGH

Nice job, Bob. What size were your screw holes on the case back? I checked mine some time ago, and I think they were M3. One didn't thread easily, though, and I didn't want to take the chance of

Today when I started sbitx I opened the LOG file and then closed it. For the first QSO, it was written on the display only once and then it saved the QSO. Maybe this is the solution? -- Gyula HA3HZ

Very neat Bob! Raj

Here is a design for a folding tilt stand for portable operations. Tilts back 30 degrees, like my clip on design. When not in use the legs fold flat to the back of the sBITX case and the assembly does