开云体育

Thanks JJ, I really like your screen brightness control app. -- Pete VK3PYE

When you see the error, type *git stash* then rerun the update

I tried to run an update by running ./update and ran into this error: Sun 21 Jan 2024 03:25:06 PM MST Updating 7abd77d..a60313c error: Your local changes to the following files would be overwritten

Leg strength should not be an issue if printed in the correct orientation. If more strength needed, use a carbon fiber filament. 73 Roy Sent from [Proton Mail](https://proton.me/mail/home) for iOS

> > On Sat, Jan 20, 2024 at 09:31 PM, Ashhar Farhan wrote: > >> Ok, here are a few comments: > > I will offer what I think is constructive feedback, and hope it will be > accepted as such. > > >>

I think the H concept is good, but I'll have to see an image when one becomes available (no rush at all). I haven't seen the Elecraft setup so I don't know what it looks like ( I know, how could I

Hello. I created another app based on a request for the sBitx platform. https://github.com/drexjj/sBITX-Scanner sBITX Frequency Scanner is an application for scanning radio frequencies with the

Dave, Thanks for the recommendations! I had actually printed a longer leg for my kx2 several years back. It seemed strong enough.? I was actually thinking of two legs, one on either side that had a

Ashar, Clearing the PRs is good. was watching Mark Erbaugh's github as he seemed to be workng his way through a lot of the siignal processing code and cleaning things up a bit. But, he never made

I don't know if this helps, but: * Link to 3D printed stand design for sbitx ( https://www.printables.com/model/496717-sbitx-v2-stand/files ) * Link to my earlier thread on sbitx mechanicals and

It was Mark's idea first -- "I also want to add a brace -- like what Elecraft provides for their KX2/KX3 -- so the sBitx can tilt back slightly." There are a few ideas I've seen on this group too.?

Vhf version of sbitx? ( /g/BITX20/topic/96689550#99697 ) has some interesting thoughts from Farhan and others on this group. Farhan Describes his New 2 Meter SSB Transceiver (Video)

Dave - your idea of a leanable case is an excellent idea.? I have a few other QRP radios, and some of them have leaning cases. Perhaps adding legs to the existing case somehow? Since you mentioned

I wouldn't be interested in this myself, but perhaps others might be:? an sBIT covering a single frequency range, like 25 to 30 Mhz., a low TX power (a few milliwatts) and separate TX and RX ports to

I think it's wonderful! Here in the Northeast USA it is winter so for me a good time to focus on software development. In the springtime it'll be outdoors POTA season and then having a cool case for

Hi, Just finished and tested my 3d printable case for the sBitx motherboard. This is based on the OEM case design from HF Signals and leverages the original work done by Mike (KW1ND). The preferred

The current (v3.02) log program does not accept the / sign, therefore, none of the forms of occasional stations that are located outside can be entered. The call sign displayed in the reception window

I found a forum discussion between Joe K1JT and Bill G4WJS about the composite call sign. Things are still flexible here, but if you read it, you'll probably understand more than I do. I hope it leads

Nice to know.? Now I know what software version I'm running, as I don't have the button. Gerry Sent by the Windows 11 Thunderbird

Nice.? I note that it was introduced to the code on Jan 6th so not in V3.00, but in V3.01 and later. Also, unfortunately, the user-facing document I linked to above still has the V3.00 screen shot