开云体育

Ashhar, the false signal moves exactly in the same direction as the original. Allison, Thanks. BTW, your idea on the pin and slotted sleeve for the tuning screw works like a champ. I used a 10-32

Does the build command return after executing or does it just hang?

I may have corrupted some files on my microSD card: The Raspberry Pi boots but when I start the sBitx executable it now only hangs and no sBitx video appears--only the Raspberry Pi screen with the

Barry, Which way does the spur tune? That is, if you tune up by 1 KHz, does the spur move up or down? And by how much?

Most likely are those mentioned, the PTO is not clean, that being harmonis or spurious oscillations. Another is the crystal filter is not working as expected, If you just took 7 crystals and wired it

Question for those who might have an answer to this issue.? I noticed with my Daylight again build when listening to a strong CW signal (W1AW) or another strong signal, I hear the same station

What mic will work with the sbitx ? brand and model? Also I am looking at just rewiring a mic but, I can not find a schematic for the microphone just the connector in the radio. Also please tell me

messed up my sbitx? &? k3ng directories, trying to reload,,,,? trying to reload settings for audio ..., AND in the process I ""restored"" audio . WHICH WAS MY INITIAL GOAL.../... now to learn more

Check the Wiki as there are a ton of mods for? V3. Allison ------------------ Please use the forum, offline and private will go to bit bucket.

Followed your instructions and I can now run your version or Ashhar's from icons. They are both working great. It occured to me that it would be nice if you could add a letter or date after the sbitx

Does anyone know if an agc for the V-6 will come available again soon? Not a big deal but would be nice to have.

Go right ahead. [email protected]> wrote:

That is great information Shirley, mind if I share it? -- '72 Aaron K5ATG

Up for sale is a brand new, in shipping box, unbuilt Ubitx, Version 6 from HF Signals. I purchased this unit by mistake and couldn't cancel the buy. I am asking for $200 shipped withing the 48 US

C95 is an electrolytic capacitor. It has distinct positive and negative terminals, and must be installed in the correct direction. It won't work properly if the positive and negative terminals are

Thank you Chris -- '72 Aaron K5ATG

Yes you are correct the + is the positive side of the electrolyte and the other is just regular cap . Only dumb questions are the one that's not asked 73 DE Kd9usk

I’m planning on a 6 x 3 x 1.5 inch heatsink mounted with a brace and not changing any lead length on the fets. Leave them as is with mica TO-220 insulators and compound. ?I will work on cleaning up

Heatsink for that level has to be BIG.? Say 2" x4" with 1" fins. Devices need to have shortest leads possible and the heatsink must be grounded so that means insulator kit.? Do not be surprised if

Too many projects, too little time and money... I ordered a v.3 uBitx when they were first announced, then promptly back-shelved it. Anyone want to take a shot at it? Drop me an email with an offer.