开云体育

DROK clip leads. Best I have found. On Amazon. Quality clips, silicone- insulated wires, SOLDERED on. - Jerry KF6VB

Wow, that WORKED the first time!? Thanks to the wonderful support from my new host, the move was pretty much painless.? Login to the new site is still www.w0eb.com ( http://www.w0eb.com ) (do not

I agree,a lot of alligator clips for the low current circuit voltage type are very flimsy and tend to twist.I happened across some better quality ones at a UK radio rally and bought loads and made my

Fellows builders.? This might seem trivial but bear with me.? I cannot find a source of GOOD alligator clips.? I have purchased new clips in bundles of 10 at ham shows, etc.? When pinched they

Hi folks, The TSW Website ( https://www.w0eb.com ) will be down for a few days while migrating the site to a new server. It was originally hosted for free by a friend of mine on his personal server,

Hi Ramon, Did you place an order for the boards ? Best regards, Peter.

Thank you, thank you. That did the trick! Stephen

ALL the .ino files need to be moved into the folder you created.

After successfully uploading Reed's R1.5.1 firmware onto a uBITX v6 several times, I attempted to upload the Factory v5 firmware to a Nano (standalone) for later installation in a friend's v5 that is

Got a usb2 mini-B cable, installed the?CH340 driver and fired up uBITX Memory Manager. As I thought the s-meter had been set in memory by the previous owner (see attached) and I guess it's just

Robert, Simple conductive shielding paint will do the trick. Easy to use and apply. This is just one of many products available. I use it in many

I've got some info stored away of using a plasma based vacuum coating system (homebrew), and it might be a great way to coat the interior of cases with a transparent but conductive coating.? From

Yes it locked up with "TX:14.225.00" etc displayed on the second line of the LCD except some of the characters were garbled with nonsense patterns. A capacitor across the PTT line and ground on the

Gahhh, So according to that calculator, skin depth is inversely proportional to the square ROOT of the frequency.

Thanks! Got it! DC

A minor clarification: At 60mhz, skin depth is 8.4um. At 60hz, skin depth is 8.4mm. So according to that calculator, skin depth is inversely proportional to the square of the

A couple of times my unit locked up but most of the times, keying the mike multiple times released the transmit lockup. I haven't worked on ti yet but I intend to put a small cap and RF block of some

It probably has to do with being able to lay it out and take it up which they do frequently. They don't worry about skin effect with Stranded wire at 60 Hz.? Earl Cox? KB5UEW?Reply or E-mail me

My uBITX v6 has recently locked up in the TX mode while I was using it with JS8Call running on my laptop. When yours locked up, was the TX indication visible on the LCD? Mine wasn’t. I realized that

I used to know what it means. https://en.wikipedia.org/wiki/Delimara_Transmitter This only refers to the medium wave 600 Kw tx and its 3 el vertical array. They also had 3 X 250Kw Short Wave Txs with