开云体育

Try this link for the tft files: https://github.com/phdlee/ubitx/releases/tag/1.1 I have not seen a difference in performance, and had problems finding a tft file for the enhanced.? I would go with

hi i built the uBitx v6 transceiver last summer, tested it? and then put it to one side while working on other projects, Now I have come back to it and expected it to work. Unfortunately when I

Evan The site uBitx.net does not show the 2.8" screen software? So you can use the basic Nextion?? and also the Enhanced would be better?? I do know the wiring for it I found it online. Happy New Year

I didn’t unsubscribe from any group

I found that if i plugged in the USB cable into the uBITX before turning on the volume knob the interface worked. If i had the uBITX running and then plugged in the USB there were connection errors.

Plenty has seem to be written about audio output on the different versions of the uBitx. I was wondering if anyone out there had done a review/writeup of the different after market audio amps that are

Alex See Rafael's instruction. The bfo comes unadjusted and yours may be way off. The bfo is the oscillator for the final mixer in receive path. It must be precise to create the audio, as the

Hi Alex I had the same problem. First the sound was very faint and too high pitched. Then someone here or in the FB group suggested I should tune the BFO. The sound improved, but the reception was

There is an “unsubscribe” link at the bottom of every email you receive. -- Karl Heinz - K5KHK

Gary, your answer is better... Bob — KK5R

Double check the speaker cable where it plugs into the board. If not perfectly aligned and connected, there may be no audio. It's hard to reach in the corner of the board but it happened to me so it

I remember once VERY CAREFULLY soldering a wire to a broken screw (just a spot of solder) and using this to back out a broken screw. One it clears the surface sufficiently, grab it with needle nose

I think I see that a screw is broken off in the standoff. If it is a screw, it can be removed by drilling a hole in it and using a screw extractor but if you do not have the tooling for this, it is

Gregg, The parts your a looking for are called "standoffs". Measure the standoff height and order new ones. The screws are M3. An example of a kit is eBay item number:353263945615 I don't know if this

Jon, That depends on which Nextion you have purchased.? Also on what features you may want to add.? A good source is ubitx.net in the download section for larger screen sizes.? For the 2.8" Nextion

Evan One other thing you said about having the correct program for the Nextion? where does that come from??

Evan I do not have the Nextion yet, but it is on order. You answered what I wanted to know you cannot use the stock uBitx screen. I thought that! As for the Xloader, and as you say it is just my

Confirm unsubscription Paul mGauci

Jon, Before you try to flash the KD8CEC firmware, do you have the Nextion screen and the correct program for it?? The KD8CEC firmware will not work with the stock uBITX screen. Since Xloader is free,

Hello Bob, Nice to know you like football. Hey, yeah, we’re world champions. But I’d still watch the Super Bowl. The 2021 Super Bowl will take place on February 7 in Tampa, Florida. cdt