开云体育

Rajesh, The current KD8CEC Memory Manager version I believe is 1.11.? Here is the link to the GitHub repository: https://github.com/phdlee/ubitx/releases/tag/v1.11 And Dr. Lee's webpage that explains

Hello Lee, At the very outset we would like to inform you that this forum is not a place where the sales matters of HF Signals are discussed. This is a uBitx forum for discussing the technical issues

Hi Evan, Which memory manager version is this. May I request for the link. I have Ubitx ver3. What should be the calibration value. So also seek some inputs on eliminating audio distortion. Thanks

Forgot to add that the Covid-19 warning was gone from the site. -- Lee - N9LO "I Void Warranties"

HFSIGNALS web site had a warning that due to Covid-19 they were temporally not shipping.?? 12 days ago I ordered one and they took my payment.? I sent an email to sales@... asking if it

Thank you?Sent via the Samsung Galaxy A10e, an AT&T 4G LTE smartphone

Try to find a local ham who will tell you if he/she can hear you when you transmit. I'm sure they'd be glad to do it. We're all new to some degree or another. Don't let that lead to indecision. Grab

Thank you, for trying to help me but unfortunately, I am new to this, so my learning curve flat. Apparently this uBitx v6 is not for the novice.?I don't have the proper test equipment. ?Looks like I

Mic pinouts are not all the same. It can vary between manufacturers and depends on the designer. If you know that other mics are compatible with the V6 and what those mics can work with and if there

Also: 10) With the V6 connected to a dummy load, try transmitting while monitoring with an existing ham rig, if available, tuned to same frequency and in same mode. If volume is not turned down, you

I connected the to my Baofeng hamdheld. No transmission. No LED on mic either.Sent via the Samsung Galaxy A10e, an AT&T 4G LTE smartphone

I only have DVMSent via the Samsung Galaxy A10e, an AT&T 4G LTE smartphone

Several ways to test your electret microphone capsule. 1) make up a simple adapter so you can connect its output to the audio input of the receive side of your transceiver. 2) Wire up an LM386 as a

Thomas, I would start by verifying that the CW transmission is working.? If not, then there is a power amp problem.? If you do get a reasonable amount of power out on CW, then the audio input is the

I have the v6 versionSent via the Samsung Galaxy A10e, an AT&T 4G LTE smartphone

Thomas, What version of uBITX do you have? Does the rig put out a signal in CW mode?? CW will test the transmit stages after the first mixer, creating a checkpoint that will point you in the correct

How can I test my microphone to see if it is working? The radio receives well, but I not connect to anyone. With my digital voltmeter I unscrewed the jack, place the negative lead to the negative side

SolderSmoke Podcast #223 Field Day, Club Talks, Patreon, NanoVNA, Farhan Video, SPRAT, BIG MAILBAG | | | | | | | | | | | SolderSmoke Podcast #223 Field Day, Club Talks, Patreon, NanoVNA, Farhan...

You need to or no audio. -- *AMIE N9OXO*

There is a new version of the YUN rev2 https://store.arduino.cc/usa/arduino-yun-rev-2 ~$45 Jerry and Todd in addition to your explanation and I have thought of integrating with a RPI which I am