开云体育

Do you have a link to this video? 73 Joe KD2NFC

OM the most difficult to source components (crystals, toroids, etc) can easily be seen here.? the other parts are more common, except the new v5 suggests using some VHF NPNs in the 45 MHz

Thank you Mark for that. I want to build it and if it works then I can make mods. I will build each section in modules so that if a mod doesn't quite work the original should work assuming no major

Hi N8DAH, Thanks for the tip on Wa2EBY.? When I saw that GoldDregger Video had purchased the boards and done a complete build and test on the amp AND the accompanying? multi band filter, I went to

Thanks for your advice, Evan./// It's model V4. Thanks!

This looks like a BFO adjustment issue to me.? I believe that the carrier is in the waterfall as well.? Another possibility is the balanced mixer with T7 and D5 may have issues.? You could have a

Hi,? may I have a copy oF list component as well please???? Thank

uBitx version ? Raj

Hello everyone! I would like to share with you some informations, I installed a new Inverted V antenna for 20m and I discovered that my uBitx is transmitting some "shadow" signal along the center

here? some pics...? for? your help.?? tnx in advance? danilo in3izq

Paul, my concern with anything setup for 13.56MHz is the bias levels for the amp, simply because there are no applications I am aware of that call for linear operation in that ISM band! -Justin N2TOH

Lee, I've been retired 10 years now, all I do is climb the walls looking for stuff to do! -Justin N2TOH

They were selling the fully assembled Antuinos for $80 at FDIM. =Vic=

Upload a crisp photo on the internal main board. let us see.

hello,? i'm?? in3izq danilo? from? italy. Have? buy? by friend? an? ubitx? , when i? on?? her look? at display ubitx? 0.20. can i? upgrade at? version?? 3? or? 4 ?? are a newbie

Obviously

Obvious that only Farhan can bring out the price at the due time

I see the Antuino was officially released at FDIM. Anyone know how much it will be to the rest of us?

Update: it works now. The problem was a cold solder joint on the batt(-) pin of the barrel connector. I should have looked more closely before posting! Bruce w8bh.net

Jack No I was merely be philosophical and maybe slightly trivial. In spite of my call Dayton is about 10 hours away by car, but I should consider making the trip. Nice there are wares to consider,?