开云体育

I am curious to the relationship of the IF-S to the calibration and/or the BFO. I have things set on the radio and I can hear pretty conversation clearly but my IF-S is set all the way to the right at

Thanks for all the help everyone. I got it working pretty good and I can hear conversations very clearly.? Thanks again Bill

Tim, here's what I got this evening. Hopefully the numbers are good. They are similar to what I posted yesterday. The Vol-Hi measures are p-p done on an o-scope. There was a fair amount of noise at

Sascha, maybe you can solve your problem of the noisy stepper motor using a low speed DC gear motor like

Hi everybody, for the OMs who where interested in this project, I have made two videos of the controller in use with the

I have found that a 470 ohm in series with the 10 uF, seems to work well. Philip G7JUR

George Its a big planet we live on. These rigs keep landing all over the world, from a small enterprise. Distract yourself by preparing everything for case assembly.? And explore what you may do

Ok thanks guys. I ordered it DHL. I just wanted to make sure the order went through.

Which way did you order it? India post or DHL.? I ordered DHL and got full tracking info. If I remember right the website says if you order India post it is just the confirmation email no tracking.

I went through the same thing.? For me, I contacted the email provided in the PayPal notice.? They ultimately responded that I would get a notification when the item shipped, which I did a couple of

Hi all I ordered my kit about a week ago. I got a confirmation from PayPal but never got an order confirmation for the board. I looked on the website and there’s no way to contact them to make sure

I am under the impression the documentation has been fixed. That aside. R70 is a good place to be taking the audio from no issues there. I am fairly confident the issue stems from the drive level

Thanks for all replies. At least the small display I have responds to touch! Kevin VK3DAP / ZL2DAP -- Kevin B. G. Luxford kbgluxford@...

any ideea haw to fix this error?!but whene i try to write on raduino i get message thar is writing but no mesaje is receive....i use another pc and the same problem...the ubitx is new,out from the

Thanks also, Tim, for these explanations. With the correct wiring instructions most of these questions didn't need to be answered. As far as vol-high I'm taking it from the via hole at R70 which is

I’m sorry to hear that.

Hi! Thanks to everyone for digging into this. I just added the AGC mod to my board and wondered about this behaviour. I'd love to know how to tweak the board to work on a v4

Thanks for the links. I bought those exact ones when you posted the link. Yes I bought a pack of ferrites once thinking I only needed a few and ended up using the all and then needing to buy more.

I know I had to search high and low for a 3.2 tft. And now I have a 5” and I had to redesign my own hmi file using CEC original 2.8 hmi. Some photoshopping and learning the nextion display editor

Hi Kevin, The hmi/tft files over 2.8 are meant for you to resize yourself. It's not an easy task. I have several clean iterations for the 3.5". There are also a few floating around...you have to